Описание

MXQ Pro

• Для сравнения устройства с конкурентами и по вопросам выбора устройств обращайтесь в раздел:Выбор и сравнение
  
• Перед размещением изображения ознакомьтесь с темой:Работа с изображениями на форуме
  
• Сообщения, не относящиеся к теме обсуждения (оффтоп), удаляются без предупреждения.
  

Характеристики, Фото, Прошивки, Root, Recovery - MXQ Pro (без доп. надписей)

Характеристики, Фото, Прошивки, Root, Recovery - MXQ Pro 4K

SoC – Amlogic S905 четыре ядра ARM Cortex-A53 @ до 2.0GHz
GPU - 8-ми ядерный ARM Mali-450MP
ОС - Android 5.1.1 Lollipop
Оперативная память – 1GB DDR3
Флеш память – 8GB NAND flash + слот SD карты
Видео выходы – HDMI 2.0 (не проверено) + композитный выход на mini-jack AV
Декодирование видео – 4K@60 Hz 10-bit HEVC. AVS+, H.264 до 4K 30 Hz. (H.264 только 8-bit)
Аудио выходы – HDMI, коаксиальный S/PDIF (mini-jack), линейный стерео на mini-jack AV
Сеть – 10/100M Ethernet, 802.11 b/g/n Wi-Fi (Realtek 8189es)
Bluetooth - отсутствует!
USB – 4 порта USB 2.0 тип A
Управление - IR, HDMI-CEC
Питание – внешний адаптер DC 5V/2A
Пульт IR без гироскопов. На пульте имеются 5 программируемых кнопок.

Фото MXQ Pro 4K

Скрипт обновления выглядит так до момента прекращения обновления(последняя строчка- вывод сообщения "система повреждена"):

mount("ext4", "EMMC", "/dev/block/system", "/system", "max_batch_time=0,commit=1,data=ordered,barrier=1,errors=panic,nodelalloc");
getprop("ro.build.fingerprint") == "Android/p200/p200:5.1.1/LMY47V/20151224:userdebug/test-keys" ||
getprop("ro.build.fingerprint") == "Android/p200/p200:5.1.1/LMY47V/20160125:userdebug/test-keys" ||
abort("Package expects build fingerprint of Android/p200/p200:5.1.1/LMY47V/20151224:userdebug/test-keys or Android/p200/p200:5.1.1/LMY47V/20160125:userdebug/test-keys; this device has " + getprop("ro.build.fingerprint") + ".");
getprop("ro.product.device") == "p200" || abort("This package is for \"p200\" devices; this is a \"" + getprop("ro.product.device") + "\".");
ui_print("Verifying current system. ");

Что он проверяет до этого момента, не разобрался. Но рут не упоминается точно. Вроде из build.prop информация об устройстве соответствует:

# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=LMY47V
ro.build.display.id=LMY47V-201512241823
ro.build.version.incremental=20151224
ro.build.version.sdk=22
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=5.1.1
ro.build.version.security_patch=2015-11-01
ro.build.version.base_os=
ro.build.date=Thu Dec 24 21:50:16 CST 2015
ro.build.date.utc=1450965016
ro.build.type=userdebug
ro.build.user=gt
ro.build.host=gt-server
ro.build.tags=test-keys
ro.build.flavor=p200-userdebug
ro.product.model=MXQ Pro
ro.product.brand=Android
ro.product.name=p200
ro.product.device=p200
ro.product.board=p200

Сообщение отредактировал ezhievich - 07.02.16, 14:03

Группа: Друзья 4PDA
Сообщений: 52
Регистрация: 02.02.07

На приставке доступен ADB через сеть:
Нужно определить IP приставки в локальной сети. Можно посмотреть IP в настройках сети или на роутере. Если используется провод Ethernet то в настройках приставки можно задать статический IP.
Дальше качаем adb, распаковыем. открываем коммандную строку, переходим в папку с adb.
Проверяем IP ping XXX.XXX.XXX.XXX где заменяем XXX.XXX.XXX.XXX на IP приставки (наприме ping 192.168.1.100).
Подключение adb connect XXX.XXX.XXX.XXX (adb connect 192.168.1.100)
Переходим в режим рута adb root. после этого соединение порвется.
Опять подключаемся adb connect XXX.XXX.XXX.XXX (adb connect 192.168.1.100)
После этого можно работать с ADB как обычно: передавать команды, отправлять/скачивать файлы и т.п.
Например:
adb shell uname -a - версия ядра
adb shell ls /dev/block/ - список список разделов во внутренней памяти
adb shell ls /system/ - список файлов и каталогов в /system
adb pull /system/build.prop - скачать файл build.prop к себе на комп
и так далее, на что хватит фантазии :)
Для запись в /system надо как обычно сделать mount -o rw,remount /system

Перезагрузка в recovery:

adb reboot recovery
Recovery унылое, заводское. Надо искать способ поставить CWM или TWRP

Fastboot на приставке не удалось обнаружить.
Еще есть загрузчик U-Boot.

Лог загрузки приставки

GXBB:BL1:08dafd:0a8993;FEAT:EDFC318C;POC:3;RCY:0;EMMC:800;NAND:0;READ:0;CHK:0;
TE: 34841
no sdio debug board detected

BL2 Built. 15:24:17, Oct 28 2015.
gxb g5d0d038 - xiaobo.gu@droid05

Board ID = 2
set vcck to 1100 mv
set vddee to 1000 mv
CPU clk: 1536MHz
DDR channel setting: DDR0 Rank0+1 same
DDR0: 1024MB @ 792MHz(2T)-11
DataBus test pass!
AddrBus test pass!
NAND init
Load fip header from NAND, src: 0x0000c000, des: 0x01400000, size: 0x000000b0
Load bl30 from NAND, src: 0x00010000, des: 0x01000000, size: 0x00009ef0
Sending bl30. OK.
Run bl30.
Load bl301 from NAND, src: 0x0001c000, des: 0x01000000, size: 0x00001ab0
Wait bl30. Done
Sending bl301. OK.
Run bl301.
Load bl31 from NAND, sr
: 0x00020000, des: 0x10100000, size: 0x00011130

--- UART initialized after reboot ---

[Reset cause: unknown]

[Image: unknown, amlogic_v1.1.3046-00db630 2015-10-28 15:24:31 xiaobo.gu@droid05]

bl30: cheLoad bl33 from NAND, src: 0x00034000, des: 0x01000000, size: 0x0009d360
ck_permit, count is 1

bl30: check_permit: ok!

chipid: ef be ad de d f0 ad ba ef be ad de not ES chip

[0.148246 Inits done]

secure task start!
high task start!
low task start!
NOTICE: BL3-1: v1.0(debug):4d2e34d
NOTICE: BL3-1: Built. 17:08:35, Oct 29 2015
INFO: BL3-1: Initializing runtime services
INFO: BL3-1: Preparing for EL3 exit to normal world
INFO: BL3-1: Next image address = 0x1000000
INFO: BL3-1: Next image spsr = 0x3c9

U-Boot 2015.01-ge90bf25-dirty (Dec 08 2015 - 10:36:55)

DRAM: 1 GiB
Relocation Offset is: 36ed6000
register usb cfg[0][1] = 0000000037f62bd8
register usb cfg[0][2] = 0000000037f62bf8
register usb cfg[2][0] = 0000000037f62c18
vpu detect type: 5
vpu clk_level = 7
set vpu clk: 666667000Hz, readback: 666660000Hz(0x300)
boot_device_flag. 1
Nand PHY Ver:1.01.001.0006 (c) 2013 Amlogic Inc.
init bus_cycle=6, bus_timing=8, system=5.0ns
NAND device id: ad de 14 a7 42 4a ad de
detect NAND device: E revision 1Ynm NAND 8GiB H27UCG8T2E
new oob mode
bus_c=6,bus_t=8,sys=4.0ns,T_REA=16,T_RHOH=15
show_phydev_list
0: nfboot
detect new nand here and new_type:6
uncorrect ecc here at page:1024, chip:0
blk check good but read failed
chip 0 page 1024
uncorrect ecc here at page:1025, chip:0
blk check good but read failed
chip 0 page 1025
uncorrect ecc here at page:1027, chip:0
blk check good but read failed
chip 0 page 1027
uncorrect ecc here at page:1029, chip:0
blk check good but read failed
chip 0 page 1029
uncorrect ecc here at page:1031, chip:0
blk check good but read failed
chip 0 page 1031
uncorrect ecc here at page:1033, chip:0
blk check good but read failed
chip 0 page 1033
uncorrect ecc here at page:1035, chip:0
blk check good but read failed
chip 0 page 1035
uncorrect ecc here at page:1037, chip:0
blk check good but read failed
chip 0 page 1037
uncorrect ecc here at page:1039, chip:0
blk check good but read failed
chip 0 page 1039
uncorrect ecc here at page:1041, chip:0
blk check good but read failed
chip 0 page 1041
uncorrect ecc here at page:1043, chip:0
blk check good but read failed
chip 0 page 1043
uncorrect ecc here at page:1536, chip:0
blk check good but read failed
chip 0 page 1536
get def value at blk:12,page:3072
outside dtb: 0000000000000000
using dtb on nand
amlnf_dtb_init_partitions: probe.
uncorrect ecc here at page:1024, chip:0
blk check good but read failed
chip0 page=1024
uncorrect ecc here at page:1536, chip:0
blk check good but read failed
chip0 page=1536
uncorrect ecc here at page:4608, chip:0
blk check good but read failed
chip0 page=4608
uncorrect ecc here at page:8192, chip:0
blk check good but read failed
chip0 page=8192
uncorrect ecc here at page:8225, chip:0
blk check good but read failed
chip0 page=8225
uncorrect ecc here at page:8259, chip:0
blk check good but read failed
chip0 page=8259
uncorrect ecc here at page:8293, chip:0
blk check good but read failed
chip0 page=8293
uncorrect ecc here at page:8327, chip:0
blk check good but read failed
chip0 page=8327
uncorrect ecc here at page:8361, chip:0
blk check good but read failed
chip0 page=8361
uncorrect ecc here at page:8395, chip:0
blk check good but read failed
chip0 page=8395
uncorrect ecc here at page:8429, chip:0
blk check good but read failed
chip0 page=8429
NAND CKECK:arg ndtb: valid=1, blk=13, page=18
start dts,buffer=0000000033ef4640,dt_addr=0000000033ef4640
parts: 11
00: logo 0000000002000000 1
01: recovery 0000000002000000 1
02: rsv 0000000000800000 1
03: tee 0000000000800000 1
04: crypt 0000000002000000 1
05: misc 0000000002000000 1
06: instaboot 0000000020000000 1
07: boot 0000000002000000 1
08: system 0000000050000000 1
09: cache 0000000020000000 2
10: data ffffffffffffffff 4
uncorrect ecc here at page:1024, chip:0
blk check good but read failed
chip0 page=1024
uncorrect ecc here at page:1033, chip:0
blk check good but read failed
chip0 page=1033
uncorrect ecc here at page:1043, chip:0
blk check good but read failed
chip0 page=1043
uncorrect ecc here at page:1536, chip:0
blk check good but read failed
chip0 page=1536
NAND CKECK:arg nbbt: valid=1, blk=8, page=0
blk 4 is shipped bad block
blk 5 is shipped bad block
blk 6 is shipped bad block
blk 7 is shipped bad block
blk 18 is shipped bad block
blk 19 is shipped bad block
blk 32 is shipped bad block
blk 33 is shipped bad block
blk 4 is bad
blk 5 is bad
blk 6 is bad
blk 7 is bad
NAND CKECK:arg fbbt: valid=1, blk=9, page=0
total_blk:60
blk 4 is bad
blk 5 is bad
blk 6 is bad
blk 7 is bad
NAND CKECK:arg ncnf: valid=1, blk=11, page=0
aml_key_init probe.
total_blk:60
blk 4 is bad
blk 5 is bad
blk 6 is bad
blk 7 is bad
blk 18 is bad
blk 19 is bad
blk 32 is bad
blk 33 is bad
NAND CKECK:arg nkey: valid=1, blk=10, page=54
boot_device_flag 1
total_blk:60
blk 4 is bad
blk 5 is bad
blk 6 is bad
blk 7 is bad
blk 18 is bad
blk 19 is bad
blk 32 is bad
blk 33 is bad
NAND CKECK:arg nenv: valid=1, blk=14, page=18
blk 4 is shipped bad block
blk 5 is shipped bad block
blk 6 is shipped bad block
blk 7 is shipped bad block
blk 18 is shipped bad block
blk 19 is shipped bad block
blk 32 is shipped bad block
blk 33 is shipped bad block
nfboot. 0x000000000000-0x000001000000 :partn=0:single_chip single_plane
nfcache. 0x00000f000000-0x00002b000000 :partn=1:single_chip multi_plane
nfcode. 0x00003a000000-0x00008f000000 :partn=9:single_chip multi_plane
nfdata. 0x0000c9000000-0x000137000000 :partn=1:single_chip multi_plane
(nfboot) bad blks 0
(nfcache) bad blks 0
(nfcode) bad blks 0
(nfdata) bad blks 3
amlnf_logic_init() start
(nfcache), size:2b000000
nftl version 1.01.001
size_in_blk 86; total_block 76;
nftl start: size 76, free 12
-blks(76), total_blocks(64)
(nfcode), size:8f000000
nftl version 1.01.001
size_in_blk 286; total_block 275;
nftl start: size 275, free 29
-blks(275), total_blocks(246)
amlnf_logic_init() done
MMC: aml_priv->desc_buf = 0x0000000033f25210
aml_priv->desc_buf = 0x0000000033f273a0
SDIO Port B: 0, SDIO Port C: 1
uboot env amlnf_env_read. ####
In: serial
Out: serial
Err: serial
[store]To run cmd[amlnf dtb_read 0x1000000 0x40000]
cmd dtb_read:
amlnf_dtb_read: ####
262144 bytes dtd_read. OK
Net: Meson_Ethernet
wipe_data=successful
wipe_cache=successful
upgrade_step=2
reboot_mode=cold_boot
hpd_state=0
[CANVAS]addr=0x3f800000 width=3840, height=2160

Not find '576cvbs' mapped VIC
amlkey_init() enter!
[EFUSE_MSG]keynum is 4
[KM]Error:f[key_manage_query_size]L504:key[usid] not programed yet
[KM]Error:f[key_manage_query_size]L504:key[deviceid] not programed yet
Unknown command 'saradc' - try 'help'
Unknown command 'saradc' - try 'help'
Enter USB burn
Try connect time out 701, 700, 1713
Hit any key to stop autoboot: 1  0
[store]To run cmd[amlnf dtb_read 0x1000000 0x40000]
cmd dtb_read:
amlnf_dtb_read: ####
262144 bytes dtd_read. OK
ee_gate_off.
## Booting Android Image at 0x01080000.
reloc_addr =34190cd0
copy done
load dtb from 0x1000000.
Uncompressing Kernel Image. OK
kernel loaded at 0x01080000, end = 0x01efbcb8
Loading Ramdisk to 33c2f000, end 33ec44ed. OK
Loading Device Tree to 000000001fff5000, end 000000001ffffaec. OK
signature: яяяяяяяяяя
fdt_instaboot: get header err

uboot time: 3391134 us
[ 0.000000@0] Initializing cgroup subsys cpu
[ 0.000000@0] Initializing cgroup subsys cpuacct
[ 0.000000@0] Linux version 3.14.29-g9e845be-dirty (foxluo@skykirin-Server) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Thu Nov 19 12:12:30 CST 2015
[ 0.000000@0] CPU: AArch64 Processor [410fd034] revision 4
[ 0.000000@0] no prop version_code
[ 0.000000@0] bootconsole [earlycon0] enabled
[ 0.000000@0] secmon: share mem setup
[ 0.000000@0] Reserved memory: initialized node linux,secmon, compatible id aml_secmon_memory
[ 0.000000@0] __reserved_mem_alloc_size: linux,meson-fb
[ 0.000000@0] fb: Reserved memory: created fb at 0x000000003e000000, size 32 MiB
[ 0.000000@0] Reserved memory: initialized node linux,meson-fb, compatible id amlogic, fb-memory
[ 0.000000@0] __reserved_mem_alloc_size: linux,di
[ 0.000000@0] DI reserved memory: created CMA memory pool at 0x000000003c200000, size 30 MiB
[ 0.000000@0] Reserved memory: initialized node linux,di, compatible id amlogic, di-mem
[ 0.000000@0] __reserved_mem_alloc_size: linux,ion-dev
[ 0.000000@0] linux,ion-dev add multi user:ffffffc001e94620
[ 0.000000@0] ion_dev mem setup
[ 0.000000@0] Reserved memory: initialized node linux,ion-dev, compatible id amlogic, idev-mem
[ 0.000000@0] ppmgr share mem setup
[ 0.000000@0] linux,ion-dev add multi user:ffffffc001e9cc28
[ 0.000000@0] Reserved memory: initialized node linux,ion-dev, compatible id amlogic, idev-mem
[ 0.000000@0] __reserved_mem_alloc_size: linux,codec_mm_cma
[ 0.000000@0] Reserved memory: created CMA memory pool at 0x0000000027c00000, size 192 MiB
[ 0.000000@0] Reserved memory: initialized node linux,codec_mm_cma, compatible id shared-dma-pool
[ 0.000000@0] __reserved_mem_alloc_size: linux,picdec
[ 0.000000@0] Reserved memory: created CMA memory pool at 0x0000000037000000, size 48 MiB
[ 0.000000@0] Reserved memory: initialized node linux,picdec, compatible id shared-dma-pool
[ 0.000000@0] __reserved_mem_alloc_size: linux,codec_mm_reserved
[ 0.000000@0] codec_mm:vdec: reserved mem setup
[ 0.000000@0] Reserved memory: initialized node linux,codec_mm_reserved, compatible id amlogic, codec-mm-reserved
[ 0.000000@0] cma: Reserved 8 MiB at 36800000
[ 0.000000@0] psci: probing function IDs from device-tree
[ 0.000000@0] PERCPU: Embedded 12 pages/cpu @ffffffc03a1ac000 s19328 r8192 d21632 u49152
[ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 244696
[ 0.000000@0] Kernel command line: rootfstype=ramfs init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xc81004c0 ramoops.mem_address=0x20000000 ramoops.mem_size=0x100000 ramoops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=permissive logo=osd1,loaded,0x3f800000,576cvbs hdmimode=720p60hz cvbsmode=576cvbs hdmitx= androidboot.firstboot=0 mac=55:08:18:00:10:24 androidboot.mac=55:08:18:00:10:24
[ 0.000000@0] logo: osd1
[ 0.000000@0] logo: loaded
[ 0.000000@0] logo: 0x3f800000
[ 0.000000@0] logo: 576cvbs
[ 0.000000@0] logo: get hdmimode: 720p60hz
[ 0.000000@0] logo: get cvbsmode: 576cvbs
[ 0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000@0] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000@0] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000@0] Memory: 569184K/996352K available (9508K kernel code, 991K rwdata, 3292K rodata, 1030K init, 3245K bss, 427168K reserved)
[ 0.000000@0] Virtual kernel memory layout:
[ 0.000000@0] vmalloc. 0xffffff8000000000 - 0xffffff8040000000 ( 1024 MB)
[ 0.000000@0] vmemmap. 0xffffff8040010000 - 0xffffff8041180000 ( 17 MB)
[ 0.000000@0] modules. 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
[ 0.000000@0] memory. 0xffffffc000000000 - 0xffffffc03e000000 ( 992 MB)
[ 0.000000@0] .init. 0xffffffc001d02000 - 0xffffffc001e03b80 ( 1031 kB)
[ 0.000000@0] .text. 0xffffffc001080000 - 0xffffffc001d01134 ( 12805 kB)
[ 0.000000@0] .data. 0xffffffc001e04000 - 0xffffffc001efbcb8 ( 992 kB)
[ 0.000000@0] PM: Registered nosave memory: [mem 0x01080000-0x01d00fff]
[ 0.000000@0] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000@0] Preemptible hierarchical RCU implementation.
[ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000@0] NR_IRQS:64 nr_irqs:64 0
[ 0.000007@0] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
[ 0.007345@0] mclk->mux_reg =ffffff8000004990,mclk->reg =ffffff8000008994
[ 0.014199@0] local timer MESON TIMER-G mclk->mux_reg =ffffff8000004990,mclk->reg =ffffff800000a998
[ 0.023274@0] local timer MESON TIMER-H mclk->mux_reg =ffffff8000004990,mclk->reg =ffffff800000c99c
[ 0.032373@0] local timer MESON TIMER-I mclk->mux_reg =ffffff8000004990,mclk->reg =ffffff800000e9a0
[ 0.041464@0] Switching to timer-based delay loop
[ 0.046449@0] Console: colour dummy device 80x25
[ 0.050829@0] Calibrating delay loop (skipped), value calculated using timer frequency. 2.00 BogoMIPS (lpj=10000)
[ 0.061233@0] pid_max: default: 32768 minimum: 301
[ 0.066109@0] Security Framework initialized
[ 0.070339@0] SELinux: Initializing.
[ 0.074065@0] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.080928@0] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.089937@0] device-tree: Duplicate name in /efusekey, renamed to "key0#1"
[ 0.095284@0] device-tree: Duplicate name in /efusekey, renamed to "key1#1"
[ 0.102273@0] device-tree: Duplicate name in /efusekey, renamed to "key2#1"
[ 0.109279@0] device-tree: Duplicate name in /efusekey, renamed to "key3#1"
[ 0.118156@0] Initializing cgroup subsys debug
[ 0.120736@0] Initializing cgroup subsys freezer
[ 0.125401@0] ftrace: allocating 32996 entries in 129 pages
[ 0.160527@0] /cpus/cpu@0: Missing clock-frequency property
[ 0.160570@0] /cpus/cpu@1: Missing clock-frequency property
[ 0.166165@0] /cpus/cpu@2: Missing clock-frequency property
[ 0.171748@0] /cpus/cpu@3: Missing clock-frequency property
[ 0.177355@0] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
[ 0.225794@0] Meson chip version = RevB (1F:B - 0:0)
[ 0.244936@1] CPU1: Booted secondary processor
[ 0.264905@2] CPU2: Booted secondary processor
[ 0.284904@3] CPU3: Booted secondary processor
[ 0.284958@0] Brought up 4 CPUs
[ 0.295916@0] SMP: Total of 4 processors activated.
[ 0.301319@0] devtmpfs: initialized
[ 0.308625@0] instabooting: 0
[ 0.317300@0] pinctrl core: initialized pinctrl subsystem
[ 0.317907@0] regulator-dummy: no parameters
[ 0.321989@0] NET: Registered protocol family 16
[ 0.326671@0] ramoops: using module parameters
[ 0.330991@0] console [pstore-1] enabled
[ 0.334482@0] pstore: Registered ramoops as persistent store backend
[ 0.340858@0] ramoops: attached 0x100000@0x20000000, ecc: 0/0
[ 0.347296@0] register canvas platform driver
[ 0.351009@0] codec:ignore bus ops for cpu=25
[ 0.355392@0] codec:ignore bus ops for cpu=29
[ 0.359758@0] codec:register amports ops for bus[0]
[ 0.364663@0] codec:register amports ops for bus[4]
[ 0.369557@0] codec:register amports ops for bus[3]
[ 0.374462@0] codec:register amports ops for bus[2]
[ 0.379356@0] codec:register amports ops for bus[1]
[ 0.384262@0] codec:register amports ops for bus[13]
[ 0.389244@0] codec:register amports ops for bus[2]
[ 0.394144@0] codec:register amports ops for bus[14]
[ 0.399200@0] register rdma platform driver
[ 0.403765@0] vdso: 2 pages (1 code, 1 data) at base ffffffc001e0b000
[ 0.409838@0] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.417349@0] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.424417@0] software IO TLB [mem 0x34800000-0x34c00000] (4MB) mapped at [ffffffc034800000-ffffffc034bfffff]
[ 0.433083@0] Serial: AMBA PL011 UART driver
[ 0.437644@0] hdmitx: system: amhdmitx_init
[ 0.441570@0] hdmitx: system: Ver: 2014May6
[ 0.445839@0] aml_i2c version: 20140813
[ 0.449691@0] tv_vout: tv_init_module
[ 0.453300@0] tv_vout: major number 254 for disp
[ 0.457940@0] vout_notify: vout_register_server
[ 0.462482@0] tv_vout: register tv module server ok
[ 0.467454@0] codec_mm:codec_mm_module_init
[ 0.471743@0] gxbb clk HIU base is 0xffffff800002a000
[ 0.476664@0] gxbb clk ao base is 0xffffff800002c000
[ 0.481675@0] register mpll_clk_out0 success done
[ 0.486379@0] register mpll_clk_out1 success done
[ 0.491098@0] register mpll_clk_out2 success done
[ 0.495991@0] register sys pll success done
[ 0.500056@0] clkrate [ xtal ]. 24000000Hz
[ 0.504315@0] clkrate [ 32Khz ]. 32000Hz
[ 0.508421@0] clkrate [ clk81 ]. 166666666Hz
[ 0.512882@0] clkrate [ fixed_pll ]. 2000000000Hz
[ 0.517790@0] clkrate [ fclk_div2 ]. 1000000000Hz
[ 0.522682@0] clkrate [ fclk_div3 ]. 666666666Hz
[ 0.527501@0] clkrate [ fclk_div4 ]. 500000000Hz
[ 0.532307@0] clkrate [ fclk_div5 ]. 400000000Hz
[ 0.537125@0] clkrate [ fclk_div7 ]. 285714285Hz
[ 0.541953@0] gxbb clock initialization complete
[ 0.546674@0] msr_clk_reg0=ffffff800002e75c,msr_clk_reg2=ffffff800003a764
[ 0.554777@0] amlogic iomap probe done
[ 0.557440@0] Init pinux probe!
[ 0.560995@0] pinmux-gxbb c1109880.pinmux: Probed amlogic pinctrl driver
[ 0.567332@0] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xbc)
[ 0.575110@0] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xbc)
[ 0.583256@0] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xbc)
[ 0.591209@0] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xbc)
[ 0.600304@0] codec:codec map io source 0x00000000c1100000,size=1048576 to 0xffffff8000800000
[ 0.607839@0] codec:codec map io source 0x00000000c8820000,size=65536 to 0xffffff80003a0000
[ 0.616233@0] codec:codec map io source 0x00000000c883c000,size=8192 to 0xffffff800007c000
[ 0.624556@0] codec:codec map io source 0x00000000c8100000,size=1048576 to 0xffffff8000980000
[ 0.633115@0] codec:codec map io source 0x00000000d0100000,size=262144 to 0xffffff8000b00000
[ 0.641607@0] codec:codec map io source 0x00000000c8838000,size=1024 to 0xffffff800006e000
[ 0.650014@0] codec_mm has 2 memory regions
[ 0.654120@0] codec_mm codec_mm.15: assigned reserved memory node linux,codec_mm_cma ok
[ 0.662169@0] codec_mm:codec_mm_reserved_init 0000000023b00000->0000000027c00000
[ 0.669603@0] codec_mm codec_mm.15: assigned reserved memory node linux,codec_mm_reserved ok
[ 0.678087@0] codec_mm:codec_mm_probe mem init done
[ 0.682985@0] codec_mm:add reserve memory 0000000023b00000(aligned 0000000023b00000) size=4100000(aligned 4100000)
[ 0.693459@0] codec_mm has 2 memory regions
[ 0.697605@0] codec_mm codec_mm.15: assigned reserved memory node linux,codec_mm_cma ok
[ 0.705653@0] codec_mm:codec_mm_reserved_init 0000000023b00000->0000000027c00000
[ 0.713084@0] codec_mm codec_mm.15: assigned reserved memory node linux,codec_mm_reserved ok
[ 0.721575@0] codec_mm:codec_mm reserved memory probed done
[ 0.727174@0] codec_mm:codec_mm_probe ok
[ 0.732241@0] VPU driver version: v01
[ 0.734795@0] vpu driver detect cpu type: gxbaby
[ 0.739431@0] load vpu_clk in dts: 666667000Hz(7)
[ 0.744217@0] vpu_probe OK
[ 0.747569@0] hdmitx: system: amhdmitx_probe
[ 0.751373@0] ------------[ cut here ]------------
[ 0.755980@0] WARNING: CPU: 0 PID: 1 at /home/foxluo/amlogic/aml_s905_gx_v20151031/common/drivers/base/core.c:552 device_create_file+0x84/0xbc()
[ 0.769001@0] Attribute phy: read permission without 'show'
[ 0.774601@0] Modules linked in:
[ 0.777836@0] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.29-g9e845be-dirty #1
[ 0.785363@0] Call trace:
[ 0.787988@0] [<ffffffc001088e74>] dump_backtrace+0x0/0x144
[ 0.793584@0] [<ffffffc001088fd4>] show_stack+0x1c/0x28
[ 0.798842@0] [<ffffffc0019b495c>] dump_stack+0x74/0xb8
[ 0.804085@0] [<ffffffc00109996c>] warn_slowpath_common+0x98/0xc0
[ 0.810214@0] [<ffffffc001099a08>] warn_slowpath_fmt+0x74/0x88
[ 0.816077@0] [<ffffffc0014529c4>] device_create_file+0x80/0xbc
[ 0.822023@0] [<ffffffc001600f78>] amhdmitx_probe+0x1b4/0x938
[ 0.827804@0] [<ffffffc0014599a8>] platform_drv_probe+0x28/0x60
[ 0.833747@0] [<ffffffc001457914>] really_probe+0xd4/0x244
[ 0.839264@0] [<ffffffc001457ae8>] __device_attach+0x64/0x74
[ 0.844952@0] [<ffffffc001455a60>] bus_for_each_drv+0x64/0xa8
[ 0.850721@0] [<ffffffc001457820>] device_attach+0x98/0xb8
[ 0.856239@0] [<ffffffc001456d30>] bus_probe_device+0x98/0xc0
[ 0.862010@0] [<ffffffc0014549b0>] device_add+0x434/0x514
[ 0.867441@0] [<ffffffc0015d3e3c>] of_device_add+0x58/0x94
[ 0.872946@0] [<ffffffc0015d4658>] of_platform_device_create_pdata+0x70/0xb0
[ 0.880040@0] [<ffffffc0015d47a8>] of_platform_bus_create+0xcc/0x2a4
[ 0.886427@0] [<ffffffc0015d4aa4>] of_platform_populate+0x4c/0xb8
[ 0.892549@0] [<ffffffc001d04290>] arm64_device_init+0x24/0x34
[ 0.898414@0] [<ffffffc0010816a4>] do_one_initcall+0xd4/0x138
[ 0.904189@0] [<ffffffc001d02914>] kernel_init_freeable+0x13c/0x1dc
[ 0.910486@0] [<ffffffc0019ae644>] kernel_init+0x1c/0xdc
[ 0.915839@0] ---[ end trace d19b2ad10eef01ec ]---
[ 0.920645@0] ------------[ cut here ]------------
[ 0.925454@0] WARNING: CPU: 0 PID: 1 at /home/foxluo/amlogic/aml_s905_gx_v20151031/common/drivers/base/core.c:552 device_create_file+0x84/0xbc()
[ 0.938487@0] Attribute hdcp_ctrl: read permission without 'show'
[ 0.944611@0] Modules linked in:
[ 0.947846@0] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.14.29-g9e845be-dirty #1
[ 0.956336@0] Call trace:
[ 0.958960@0] [<ffffffc001088e74>] dump_backtrace+0x0/0x144
[ 0.964564@0] [<ffffffc001088fd4>] show_stack+0x1c/0x28
[ 0.969808@0] [<ffffffc0019b495c>] dump_stack+0x74/0xb8
[ 0.975064@0] [<ffffffc00109996c>] warn_slowpath_common+0x98/0xc0
[ 0.981183@0] [<ffffffc001099a08>] warn_slowpath_fmt+0x74/0x88
[ 0.987052@0] [<ffffffc0014529c4>] device_create_file+0x80/0xbc
[ 0.992996@0] [<ffffffc001600fc0>] amhdmitx_probe+0x1fc/0x938
[ 0.998777@0] [<ffffffc0014599a8>] platform_drv_probe+0x28/0x60
[ 1.004726@0] [<ffffffc001457914>] really_probe+0xd4/0x244
[ 1.010233@0] [<ffffffc001457ae8>] __device_attach+0x64/0x74
[ 1.015926@0] [<ffffffc001455a60>] bus_for_each_drv+0x64/0xa8
[ 1.021696@0] [<ffffffc001457820>] device_attach+0x98/0xb8
[ 1.027213@0] [<ffffffc001456d30>] bus_probe_device+0x98/0xc0
[ 1.032984@0] [<ffffffc0014549b0>] device_add+0x434/0x514
[ 1.038415@0] [<ffffffc0015d3e3c>] of_device_add+0x58/0x94
[ 1.043921@0] [<ffffffc0015d4658>] of_platform_device_create_pdata+0x70/0xb0
[ 1.051014@0] [<ffffffc0015d47a8>] of_platform_bus_create+0xcc/0x2a4
[ 1.057401@0] [<ffffffc0015d4aa4>] of_platform_populate+0x4c/0xb8
[ 1.063521@0] [<ffffffc001d04290>] arm64_device_init+0x24/0x34
[ 1.069388@0] [<ffffffc0010816a4>] do_one_initcall+0xd4/0x138
[ 1.075164@0] [<ffffffc001d02914>] kernel_init_freeable+0x13c/0x1dc
[ 1.081459@0] [<ffffffc0019ae644>] kernel_init+0x1c/0xdc
[ 1.086799@0] ---[ end trace d19b2ad10eef01ed ]---
[ 1.091786@0] hdmitx: system: not find match pwr-ctl
[ 1.096603@0] hdmitx hpd irq = 89
[ 1.100279@0] hdmitx20: Mapped PHY: 0xc0800000
[ 1.104395@0] hdmitx20: Mapped PHY: 0xc1104400
[ 1.108861@0] hdmitx20: Mapped PHY: 0xc8100000
[ 1.113308@0] hdmitx20: Mapped PHY: 0xc8834000
[ 1.117777@0] hdmitx20: Mapped PHY: 0xc883a000
[ 1.122233@0] hdmitx20: Mapped PHY: 0xc883c000
[ 1.126705@0] hdmitx20: Mapped PHY: 0xd0100000
[ 1.131159@0] hdmitx20: Mapped PHY: 0xda83a000
[ 1.135858@0] avmute set to 1
[ 1.139157@0] canvas_probe reg=00000000c8838000,size=400
[ 1.143947@0] canvas maped reg_base =ffffff800008e000
[ 1.152196@0] rdma_probe
[ 1.206811@0] bio: create slab <bio-0> at 0
[ 1.207543@0] SCSI subsystem initialized
[ 1.209780@0] usbcore: registered new interface driver usbfs
[ 1.215146@0] usbcore: registered new interface driver hub
[ 1.220659@0] usbcore: registered new device driver usb
[ 1.226527@0] i2c-gpio i2c_gpio.29: using pins 153 (SDA) and 154 (SCL)
[ 1.232471@0] Linux video capture interface: v2.00
[ 1.237428@0] pps_core: LinuxPPS API ver. 1 registered
[ 1.242353@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.251777@0] PTP clock support registered
[ 1.256287@0] logo: logo_init
[ 1.258810@0] tv_vout: tv_set_current_vmode[672]fps_target_mode=7
[ 1.264937@0] tv_vout: mode is 7,sync_duration_den=1,sync_duration_num=50
[ 1.271755@0] switch_vpu_mem_pd: venci ON
[ 1.275785@0] tv_vout: TV mode 576cvbs selected.
[ 1.280414@0] tv_vout: already display in uboot
[ 1.284970@0] tv_vout: new mode =576cvbs set ok
[ 1.289515@0] vout_serve: vinfo mode is: 576cvbs
[ 1.294152@0] logo: set vmode: 576cvbs
[ 1.297925@0] switch_vpu_mem_pd: viu_osd1 ON
[ 1.302203@0] switch_vpu_mem_pd: viu_osd2 ON
[ 1.306495@0] switch_vpu_mem_pd: viu_osd_scale ON
[ 1.311421@0] osd_rdma: osd_rdma_init: rmda_table p=0x36841000,op=0x36841000. v=0xffffff8000099000
[ 1.320431@0] Advanced Linux Sound Architecture Driver Initialized.
[ 1.327115@0] Bluetooth: Core ver 2.18
[ 1.330467@0] NET: Registered protocol family 31
[ 1.335023@0] Bluetooth: HCI device and connection manager initialized
[ 1.341582@0] Bluetooth: HCI socket layer initialized
[ 1.346661@0] Bluetooth: L2CAP socket layer initialized
[ 1.351933@0] Bluetooth: SCO socket layer initialized
[ 1.357289@0] cfg80211: Calling CRDA to update world regulatory domain
[ 1.363630@0] NetLabel: Initializing
[ 1.367134@0] NetLabel: domain hash size = 128
[ 1.371691@0] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.376874@0] NetLabel: unlabeled traffic allowed by default
[ 1.383337@1] Switched to clocksource Timer-E
[ 1.427201@1] NET: Registered protocol family 2
[ 1.427620@1] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.433500@1] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 1.440267@1] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.446829@3] TCP: reno registered
[ 1.450143@3] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.456289@3] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.462992@3] NET: Registered protocol family 1
[ 1.467583@3] RPC: Registered named UNIX socket transport module.
[ 1.473511@3] RPC: Registered udp transport module.
[ 1.478400@3] RPC: Registered tcp transport module.
[ 1.483301@3] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.490086@3] [wifi_dev_probe] wifi_dev_probe
[ 1.494336@3] [wifi_dev_probe] wifi_dt. interrupt_pin=
[ 1.499600@3] [wifi_dev_probe] wifi_dt. irq_num=null
[ 1.504658@3] [wifi_dev_probe] wifi_dt. irq_trigger_type=GPIO_IRQ_HIGH
[ 1.511301@3] [wifi_dev_probe] wifi_dt. power_on_pin=
[ 1.516485@3] [wifi_dev_probe] set pwm as 32k output
[ 1.521316@3] [wifi_dev_probe] dhd_static_buf setup
[ 1.526364@3] 1 bcmdhd_init_wlan_mem: wlan_static_skb[0]=ffffffc03464e200, size=3760
[ 1.534148@3] 1 bcmdhd_init_wlan_mem: wlan_static_skb[1]=ffffffc03464e000, size=3760
[ 1.541930@3] 1 bcmdhd_init_wlan_mem: wlan_static_skb[2]=ffffffc03462d000, size=3760
[ 1.549722@3] 1 bcmdhd_init_wlan_mem: wlan_static_skb[3]=ffffffc03462d100, size=3760
[ 1.557510@3] 1 bcmdhd_init_wlan_mem: wlan_static_skb[4]=ffffffc03462d200, size=3760
[ 1.565307@3] 1 bcmdhd_init_wlan_mem: wlan_static_skb[5]=ffffffc03462d300, size=3760
[ 1.573078@3] 1 bcmdhd_init_wlan_mem: wlan_static_skb[6]=ffffffc03462d400, size=3760
[ 1.580876@3] 1 bcmdhd_init_wlan_mem: wlan_static_skb[7]=ffffffc03462d500, size=3760
[ 1.588660@3] 2 bcmdhd_init_wlan_mem: wlan_static_skb[8]=ffffffc03462d600, size=7856
[ 1.596448@3] 2 bcmdhd_init_wlan_mem: wlan_static_skb[9]=ffffffc03462d700, size=7856
[ 1.604236@3] 2 bcmdhd_init_wlan_mem: wlan_static_skb[10]=ffffffc03462d800, size=7856
[ 1.612103@3] 2 bcmdhd_init_wlan_mem: wlan_static_skb[11]=ffffffc03462d900, size=7856
[ 1.619985@3] 2 bcmdhd_init_wlan_mem: wlan_static_skb[12]=ffffffc03462da00, size=7856
[ 1.627859@3] 2 bcmdhd_init_wlan_mem: wlan_static_skb[13]=ffffffc03462db00, size=7856
[ 1.635735@3] 2 bcmdhd_init_wlan_mem: wlan_static_skb[14]=ffffffc03462dc00, size=7856
[ 1.643609@3] 2 bcmdhd_init_wlan_mem: wlan_static_skb[15]=ffffffc03462dd00, size=7856
[ 1.651478@3] 3 bcmdhd_init_wlan_mem: wlan_static_skb[16]=ffffffc03462de00, size=16048
[ 1.659447@3] 4 bcmdhd_init_wlan_mem: wlan_mem_array[0]=ffffffc03464e200, size=20504
[ 1.667233@3] 4 bcmdhd_init_wlan_mem: wlan_mem_array[1]=ffffffc03464e000, size=20504
[ 1.675023@3] 4 bcmdhd_init_wlan_mem: wlan_mem_array[2]=ffffffc03462d000, size=81944
[ 1.682806@3] 4 bcmdhd_init_wlan_mem: wlan_mem_array[3]=ffffffc03462d100, size=163864
[ 1.690684@3] 4 bcmdhd_init_wlan_mem: wlan_mem_array[4]=ffffffc03462d200, size=20504
[ 1.698474@3] 4 bcmdhd_init_wlan_mem: wlan_mem_array[5]=ffffffc03462d300, size=81944
[ 1.706261@3] 5 bcmdhd_init_wlan_mem: wlan_static_scan_buf0=ffffffc034ff0000, size=65536
[ 1.714398@3] 6 bcmdhd_init_wlan_mem: wlan_static_scan_buf1=ffffffc034570000, size=65536
[ 1.722525@3] bcmdhd_init_wlan_mem: WIFI MEM Allocated
[ 1.727694@3] [wifi_dev_probe] interrupt_pin=235
[ 1.732326@3] [wifi_dev_probe] irq_num=100, irq_trigger_type=0
[ 1.738195@3] [wifi_dev_probe] power_on_pin=234
[ 1.742738@3] [wifi_dev_probe] clock_32k_pin=0
[ 1.747518@1] Unpacking initramfs.
[ 1.843164@1] Freeing initrd memory: 2644K (ffffffc033c2f000 - ffffffc033ec4000)
[ 1.846795@1] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.851457@1] audit: initializing netlink subsys (disabled)
[ 1.857066@1] audit: type=2000 audit(1.810:1): initialized
[ 1.863146@1] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.874908@1] VFS: Disk quotas dquot_6.5.2
[ 1.875120@1] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.883805@1] NFS: Registering the id_resolver key type
[ 1.885367@1] Key type id_resolver registered
[ 1.889712@1] Key type id_legacy registered
[ 1.893946@1] jffs2: version 2.2. (NAND) (SUMMARY) В© 2001-2006 Red Hat, Inc.
[ 1.901814@1] fuse init (API version 7.22)
[ 1.905834@1] msgmni has been set to 1612
[ 1.910727@1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 1.916940@1] io scheduler noop registered
[ 1.921037@1] io scheduler deadline registered
[ 1.925659@1] io scheduler cfq registered (default)
[ 1.978398@1] meson-rng c8834000.rng: hwrng registered
[ 1.981165@1] loop: module loaded
[ 1.981750@1] zram: Created 1 device(s).
[ 1.986256@1] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.992605@1] tun: Universal TUN/TAP device driver, 1.6
[ 1.997407@1] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.008186@1] libphy: stmmac: probed
[ 2.008216@1] eth0: PHY ID 02430c54 at 0 IRQ POLL (stmmac-0:00) active
[ 2.014244@1] PPP generic driver version 2.4.2
[ 2.018607@1] PPP BSD Compression module registered
[ 2.023299@1] PPP Deflate Compression module registered
[ 2.028579@1] PPP MPPE Compression module registered
[ 2.033552@1] NET: Registered protocol family 24
[ 2.038347@1] usbcore: registered new interface driver asix
[ 2.043889@1] usbcore: registered new interface driver ax88179_178a
[ 2.050144@1] usbcore: registered new interface driver cdc_ether
[ 2.056196@1] usbcore: registered new interface driver net1080
[ 2.062049@1] usbcore: registered new interface driver cdc_subset
[ 2.068181@1] usbcore: registered new interface driver zaurus
[ 2.073975@1] usbcore: registered new interface driver cdc_ncm
[ 2.079954@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.086481@1] ehci-h20ahb: H20AHB-EHCI Host Controller driver
[ 2.092394@1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.098750@1] usbcore: registered new interface driver cdc_acm
[ 2.104506@1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 2.112808@1] usbcore: registered new interface driver usb-storage
[ 2.119123@1] usbcore: registered new interface driver usbserial
[ 2.125542@1] mousedev: PS/2 mouse device common for all mice
[ 2.131159@1] i2c /dev entries driver
[ 2.134710@1] usbcore: registered new interface driver uvcvideo
[ 2.140373@1] USB Video Class driver (1.1.1)
[ 2.145333@1] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 2.153413@1] Bluetooth: HCI UART driver ver 2.2
[ 2.157962@1] Bluetooth: HCI H4 protocol initialized
[ 2.163482@1] usbcore: registered new interface driver usbhid
[ 2.168723@1] usbhid: USB HID core driver
[ 2.173048@1] ashmem: initialized
[ 2.176236@1] logger: created 256K log 'log_main'
[ 2.180933@1] logger: created 256K log 'log_events'
[ 2.185855@1] logger: created 256K log 'log_radio'
[ 2.190638@1] logger: created 256K log 'log_system'
[ 2.195877@1] ==uart0 reg addr = ffffff80000ca4c0
[ 2.200154@1] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart
[ 2.215185@1] ttyS0 use xtal 24000000 change 0 to 115200
[ 2.215220@1] console [ttyS0] enabled
[ 2.215220@1] console [ttyS0] enabled
[ 2.222259@1] bootconsole [earlycon0] disabled
[ 2.222259@1] bootconsole [earlycon0] disabled
[ 2.231309@1] ==uart1 reg addr = ffffff80000de4c0
[ 2.235649@1] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart
[ 2.245352@1] ESM HLD: Initializing.
[ 2.248652@1] ESM HLD: Registering device range 'esm'.
[ 2.253925@1] ESM HLD: Device range 'esm' has been registered.
[ 2.259691@1] ESM HLD: Creating class /sys/class/elliptic.
[ 2.265370@1] ESM HLD: The class /sys/class/elliptic has been created.
[ 2.271766@1] ESM HLD: Creating device 'esm'.
[ 2.276377@1] ESM HLD: Device 'esm' has been created.
[ 2.281254@1] ESM HLD: Done initializing the HLD driver.
INFO: HDCP22 key read fail!
INFO: p1d 0
INFO: pd1 0
[ 2.306867@1] aml_vrtc rtc.25: rtc core: registered aml_vrtc as rtc0
[ 2.307736@1] secmon has 1 memory regions
[ 2.311557@1] secmon: share in base: 0xffffff80000fc000, share out base: 0xffffff80000fe000
[ 2.319828@1] secmon secmon.3: assigned reserved memory node linux,secmon ok
[ 2.326808@1] secmon: probe done
[ 2.330174@1] storage: storage in base: 0xffffff8001800000
[ 2.335436@1] storage: storage out base: 0xffffff8001880000
[ 2.340948@1] storage: storage block base: 0xffffff8001900000
[ 2.346646@1] storage: probe done!
[ 2.350366@1] aml_sd_emmc_probe: line 3121
[ 2.354068@1] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
[ 2.363802@1] aml_sd_emmc_reg_init 796
[ 2.367228@1] pdata->caps 7
[ 2.369928@1] pdata->caps2 0
[ 2.372774@1] get property: port, value:0x00000001
[ 2.379254@1] get property: ocr_avail, value:0x00200080
[ 2.385718@1] get property: f_min, value:0x00061a80
[ 2.392180@1] get property: f_max, value:0x05f5e100
[ 2.398656@1] get property: max_req_size, value:0x00020000
[ 2.405124@1] get property: irq_in, value:0x00000003
[ 2.411587@1] get property: irq_out, value:0x00000005
[ 2.418070@1] get property: gpio_cd, str:
[ 2.423498@1] get property: pinname, str:sd
[ 2.429096@1] get property: jtag_pin, str:
[ 2.434536@1] get property: card_type, value:0x00000005
[ 2.440999@1] get property: gpio_dat3, str:
[ 2.446459@1] [aml_is_card_insert] card IN

[ 2.502803@1] normal card in
[ 2.543371@0] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
[ 2.543582@0] aml_sd_emmc_probe: line 3121
[ 2.554578@0] [aml_is_card_insert] card IN

[ 2.554628@1] [aml_is_card_insert] card IN
[ 2.554628@1] [ 2.561344@0] aml_sd_emmc_reg_init 796
[ 2.564938@0] pdata->caps 7810f
[ 2.567971@0] pdata->caps2 0
[ 2.570805@0] get property: ocr_avail, value:0x00200080
[ 2.577358@0] get property: f_min, value:0x00061a80
[ 2.583910@0] get property: f_max, value:0x0bebc200
[ 2.590313@0] get property: max_req_size, value:0x00020000
[ 2.596688@0] get property: pinname, str:sdio
[ 2.602458@0] get property: card_type, value:0x00000003
[ 2.643425@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
[ 2.643910@0] ion_dev has 1 memory regions
[ 2.660919@0] fb: osd_init_module
[ 2.661009@0] fb: viu vsync irq: 35
[ 2.662059@0] meson-fb has 1 memory regions
[ 2.666547@0] meson-fb meson-fb.12: assigned reserved memory node linux,meson-fb ok
[ 2.673973@0] fb: osd_probe vinfo:ffffffc001e957e8
[ 2.678621@0] fb: Frame buffer memory assigned at
[ 2.683017@0] fb: phy: 0x3e000000, vir:0xffffff8003c00000, size=24576K
[ 2.690026@0] fb: init fbdev bpp is:32
[ 2.693717@0] fb: ---------------clear fb0 memory
[ 2.706298@0] fb: osd[0] canvas.idx =0x40
[ 2.706316@0] fb: osd[0] canvas.addr=0x3e000000
[ 2.709170@0] fb: osd[0] canvas.width=7680
[ 2.713211@0] fb: osd[0] canvas.height=3240
[ 2.727245@0] fb: Frame buffer memory assigned at
[ 2.727266@0] fb: phy: 0x3f800000, vir:0xffffff8001a80000, size=1024K
[ 2.747121@0] fb: osd probe OK
[ 2.747287@0] vout_serve: vout_init_module
[ 2.748662@0] vout_serve: meson_vout_probe
[ 2.752720@0] vout_serve: create vout attribute OK
[ 2.757592@0] ge2d: ge2d_init_module
[ 2.761104@0] ge2d: ge2d_dev major:244
[ 2.765043@0] ge2d: ge2d clock is 400 MHZ
[ 2.768628@0] ge2d: ge2d: pdev=ffffffc034e54600, irq=182, rstc=0xffffffc022851ac0, clk=ffffffc034da2b00
[ 2.777971@0] ge2d: mapped phy: 0xd0160000
[ 2.781981@0] ge2d: ge2d start monitor
[ 2.785825@2] ge2d: ge2d workqueue monitor start
[ 2.785947@0] aml_sysled_init: module init
[ 2.786062@0] aml_sysled_dt_parse: active_low = 1
[ 2.786335@0] aml_sysled_probe: module probed ok
[ 2.786454@0] codec:Amlogic A/V streaming port init
[ 2.788194@0] codec:get gate demux control ok ffffffc0227a9780
[ 2.788199@0] codec:get gate parser_top control ok ffffffc0227a9800
[ 2.788203@0] codec:get gate vpu_intr control ok ffffffc0227a9880
[ 2.788208@0] codec:get gate vdec control ok ffffffc0227a9900
[ 2.788687@0] codec:[tsync_pcr_init]init success.
[ 2.788782@0] codec:regist mpeg12 codec profile
[ 2.788866@0] codec:regist mpeg4 codec profile
[ 2.788867@0] codec:amvdec_vc1 module init
[ 2.788959@0] codec:regist vc1 codec profile
[ 2.788960@0] codec:amvdec_h264 module init
[ 2.789070@0] codec:regist h264 codec profile
[ 2.789072@0] codec:amvdec_h264mvc module init
[ 2.789158@0] codec:regist hmvc codec profile
[ 2.789159@0] codec:amvdec_h264_4k2k module init
[ 2.789250@0] codec:regist h264_4k2k codec profile
[ 2.789251@0] codec:amvdec_h265 module init
[ 2.789342@0] codec:regist hevc codec profile
[ 2.789425@0] codec:regist mjpeg codec profile
[ 2.789428@0] codec:amvdec_real module init
[ 2.789517@0] codec:regist real codec profile
[ 2.789518@0] codec:amvdec_avs module init
[ 2.789601@0] codec:regist avs codec profile
[ 2.789656@0] amvenc_avc_probe -- reserved memory config fail.
[ 2.789659@0] amvenc_avc - cma memory pool size: 32 MB
[ 2.789677@0] encode_wq_init.
[ 2.789683@0] encode start monitor.
[ 2.789752@3] encode workqueue monitor start.
[ 2.790081@0] jpegenc module init
[ 2.790245@0] codec:picdec_driver_probe called.
[ 2.790247@0] picdec has 1 memory regions
[ 2.790279@0] picdec picdec.20: assigned reserved memory node linux,picdec ok
[ 2.790281@0] codec:picdec_driver_probe done.
[ 2.790283@0] codec:reserved memory config fail. use CMA .
[ 2.794116@0] codec:cma memory is 37000000. size is 3000000
[ 2.794658@0] codec:0 addr is 37000000################
[ 2.794667@0] codec:1 addr is 3709b400################
[ 2.794847@0] switch_vpu_mem_pd: vpu_arb ON
[ 2.795186@0] codec:create_ge2d_work_queue video task ok
[ 2.795572@0] codec:register clk_set_setting cpu[31]
[ 2.795917@0] di_module_init ok.
[ 2.795922@0] di_module_init: major 240
[ W N.7G6248@m]ldi_nreb
i[ 2. 96420@00 d
nAerlaGe hasm1 memote regioCa
[ 0 2.796370@0A dINr: ener lemont d Sc20C0ll, sx8e 3003.
[ 2.796480@0] deinterlace deinterlace.22: assigned reserved memory node linux,di ok
[ 2.796629@0] rdma_register, rdma_table_addr ffffff8000139000 rdma_table_addr_phy 36846000 reg_buf ffffffc022a34000
[ 2.796631@0] rdma_register success, handle 1 table_size 8192
[ 2.796633@0] di_probe allocate rdma channel 1.
[ 2.796636@0] DI hw version 2.
[ 2.796647@0] 0x000000c3:Y=c3,U=0,V=0
[ 2.796649@0] 0x000000c4:Y=c4,U=0,V=0
[ 2.796651@0] 0x000000c5:Y=c5,U=0,V=0
[ 2.796652@0] 0x000000c6:Y=c6,U=0,V=0
[ 2.796654@0] 0x000000c7:Y=c7,U=0,V=0
[ 2.796656@0] 0x000000c8:Y=c8,U=0,V=0
[ 2.796657@0] 0x000000c9:Y=c9,U=0,V=0
[ 2.796661@0] 0x000000ca:Y=ca,U=0,V=0
[ 2.796662@0] 0x000000cb:Y=cb,U=0,V=0
[ 2.796664@0] 0x000000cc:Y=cc,U=0,V=0
[ 2.796666@0] 0x000000cd:Y=cd,U=0,V=0
[ 2.796668@0] 0x000000ce:Y=ce,U=0,V=0
[ 2.796669@0] 0x000000cf:Y=cf,U=0,V=0
[ 2.796790@0] di_probe here.
[ 2.796811@0] switch_vpu_mem_pd: di_pre OFF
[ 2.797053@0] efusekeynum: 4
[ 2.797060@0] efusekeyname: mac offset: 0 size: 6
[ 2.797065@0] efusekeyname: mac_bt offset: 6 size: 6
[ 2.797069@0] efusekeyname: mac_wifi offset: 12 size: 6
[ 2.797075@0] efusekeyname: usid offset: 18 size: 16
[ 2.797309@0] efuse efuse.7: probe OK!
[ 2.797520@0] key unify config unifykey-num is 11
[ 2.797553@0] key unify fact unifykey-num is 11
[ 2.797556@0] aml_unifykeys_probe:1087=============unifykey_devno:ee00000
[ 2.797752@0]
6unifykey: device unifykeys created ok
[ 2.797835@0]
6aml_unifykeys_init done!
[ 2.797836@0] ppmgr module init func called
[ 2.797881@0] ppmgr_driver_probe called
[ 2.797884@0] ppmgr has 1 memory regions
[ 2.797899@0] init ppmgr memsource 3a200000->3c1fffff
[ 2.798122@0] ppmgr_probe done
[ 2.798454@0] amlogic rfkill init
[ 2.798802@0] ionvideo-000: V4L2 device registered as video13
[ 2.798809@0] [dsp]register dsp to char divece(257)
[ 2.799454@0] amaudio: driver amaudio succuess!
[ 2.799459@0] amlvideo_init called
[ 2.799459@0] amlvideo_create_instance called
[ 2.799462@0] v4l2_dev.name=:amlvideo-000
[ 2.799578@0] amlvideo-000: V4L2 device registered as video10
[ 2.799581@0]
[ 2.799581@0]
[ 2.799581@0] VECM init
[ 2.799581@0]
[ 2.799904@0] poc_cfg_reg = ffffff800013cd54
[ 2.799904@0]
[ 2.799907@0] amlnf_get_resource. d0074800 200
[ 2.799907@0]
[ 2.799932@0] boot_device_flag. 1
[ 2.799935@0] Nand PHY Ver:1.01.001.0006 (c) 2013 Amlogic Inc.
[ 2.799941@0] amlnf_phy_init. amlnf init flag 0
[ 2.800081@0] ######STS IRQ mode for nand driver
[ 2.800107@0] clk_reg 81000245
[ 2.800139@0] NAND device id: ad de 14 a7 42 4a ad de
[ 2.800143@0] detect NAND device: E revision 1Ynm NAND 8GiB H27UCG8T2E
[ 2.817104@0] -------------------------------------
[ 2.817106@0] pinmux-0: 0x0
[ 2.817107@0] pinmux-4: 0x7ff03c00
[ 2.817108@0] pinmux-5: 0x0
[ 2.817110@0] clock: 0x81000245
[ 2.817111@0] -------------------------------------
[ 2.833887@0] -------------------------------------
[ 2.833888@0] pinmux-0: 0x0
[ 2.833889@0] pinmux-4: 0x7ff03c00
[ 2.833890@0] pinmux-5: 0x0
[ 2.833892@0] clock: 0x81000245
[ 2.833892@0] -------------------------------------
[ 2.850640@0] -------------------------------------
[ 2.850641@0] pinmux-0: 0x0
[ 2.850642@0] pinmux-4: 0x7ff03c00
[ 2.850643@0] pinmux-5: 0x0
[ 2.850644@0] clock: 0x81000245
[ 2.850645@0] -------------------------------------
[ 2.850816@0] clk_reg 81000244
[ 2.850817@0] AML_NAND_NEW_OOB. new oob
[ 2.850821@0] bus_c=6,bus_t=8,sys=4.0ns,T_REA=16,T_RHOH=15
[ 2.850825@0] boot_device_flag = 1
[ 2.851414@0] uncorrect ecc here at page:1024, chip:0
[ 2.851435@0] blk check good but read failed
[ 2.851436@0] chip 0 page 1024
[ 2.851964@0] uncorrect ecc here at page:1025, chip:0
[ 2.851984@0] blk check good but read failed
[ 2.851985@0] chip 0 page 1025
[ 2.852513@0] uncorrect ecc here at page:1027, chip:0
[ 2.852534@0] blk check good but read failed
[ 2.852536@0] chip 0 page 1027
[ 2.853063@0] uncorrect ecc here at page:1029, chip:0
[ 2.853082@0] blk check good but read failed
[ 2.853083@0] chip 0 page 1029
[ 2.853611@0] uncorrect ecc here at page:1031, chip:0
[ 2.853631@0] blk check good but read failed
[ 2.853633@0] chip 0 page 1031
[ 2.854161@0] uncorrect ecc here at page:1033, chip:0
[ 2.854181@0] blk check good but read failed
[ 2.854182@0] chip 0 page 1033
[ 2.854707@0] uncorrect ecc here at page:1035, chip:0
[ 2.854728@0] blk check good but read failed
[ 2.854729@0] chip 0 page 1035
[ 2.855256@0] uncorrect ecc here at page:1037, chip:0
[ 2.855276@0] blk check good but read failed
[ 2.855277@0] chip 0 page 1037
[ 2.855805@0] uncorrect ecc here at page:1039, chip:0
[ 2.855825@0] blk check good but read failed
[ 2.855826@0] chip 0 page 1039
[ 2.856353@0] uncorrect ecc here at page:1041, chip:0
[ 2.856374@0] blk check good but read failed
[ 2.856375@0] chip 0 page 1041
[ 2.856902@0] uncorrect ecc here at page:1043, chip:0
[ 2.856923@0] blk check good but read failed
[ 2.856924@0] chip 0 page 1043
[ 2.858508@0] uncorrect ecc here at page:1536, chip:0
[ 2.858528@0] blk check good but read failed
[ 2.858529@0] chip 0 page 1536
[ 2.862130@0] get def value at blk:12,page:3072
[ 2.862674@0] uncorrect ecc here at page:1024, chip:0
[ 2.862695@0] blk check good but read failed
[ 2.862697@0] chip0 page=1024
[ 2.863221@0] uncorrect ecc here at page:1033, chip:0
[ 2.863243@0] blk check good but read failed
[ 2.863244@0] chip0 page=1033
[ 2.863866@0] uncorrect ecc here at page:1043, chip:0
[ 2.863898@0] blk check good but read failed
[ 2.863900@0] chip0 page=1043
[ 2.865479@0] uncorrect ecc here at page:1536, chip:0
[ 2.865501@0] blk check good but read failed
[ 2.865502@0] chip0 page=1536
[ 2.867563@0] NAND CKECK:arg nbbt:arg_valid=1,blk_addr=8,page_addr=0
[ 2.870193@0] nand blk 4 is shipped bad block
[ 2.870195@0] nand blk 5 is shipped bad block
[ 2.870196@0] nand blk 6 is shipped bad block
[ 2.870198@0] nand blk 7 is shipped bad block
[ 2.870202@0] nand blk 18 is shipped bad block
[ 2.870203@0] nand blk 19 is shipped bad block
[ 2.870208@0] nand blk 32 is shipped bad block
[ 2.870209@0] nand blk 33 is shipped bad block
[ 2.870218@0] nand block at blk 4 is bad
[ 2.870219@0] nand block at blk 5 is bad
[ 2.870220@0] nand block at blk 6 is bad
[ 2.870222@0] nand block at blk 7 is bad
[ 2.872739@0] NAND CKECK:arg ncnf:arg_valid=1,blk_addr=11,page_addr=0
[ 2.873256@0] nand shipped bbt at block 9
[ 2.873446@0] total_blk:60
[ 2.873448@0] nand block at blk 4 is bad
[ 2.873449@0] nand block at blk 5 is bad
[ 2.873451@0] nand block at blk 6 is bad
[ 2.873452@0] nand block at blk 7 is bad
[ 2.878591@0] nand block at blk 18 is bad
[ 2.878592@0] nand block at blk 19 is bad
[ 2.884997@0] nand block at blk 32 is bad
[ 2.884998@0] nand block at blk 33 is bad
[ 2.901260@0] NAND CKECK:arg nkey:arg_valid=1,blk_addr=10,page_addr=54
[ 2.910039@0] total_blk:60
[ 2.910566@0] uncorrect ecc here at page:1024, chip:0
[ 2.910588@0] blk check good but read failed
[ 2.910589@0] chip0 page=1024
[ 2.912313@0] uncorrect ecc here at page:1536, chip:0
[ 2.912335@0] blk check good but read failed
[ 2.912336@0] chip0 page=1536
[ 2.915518@1] sd: new high speed SDHC card at address 1234
[ 2.916172@1] sd: clock 50000000, 4-bit-bus-width
[ 2.916172@1]
[ 2.916173@1] mmcblk0: sd:1234 SA32G 29.8 GiB
[ 2.917987@1] mmcblk0: p1 < p5 >
[ 2.919145@0] uncorrect ecc here at page:4608, chip:0
[ 2.919166@0] blk check good but read failed
[ 2.919168@0] chip0 page=4608
[ 2.927050@0] uncorrect ecc here at page:8192, chip:0
[ 2.927069@0] blk check good but read failed
[ 2.927070@0] chip0 page=8192
[ 2.927567@0] uncorrect ecc here at page:8225, chip:0
[ 2.927587@0] blk check good but read failed
[ 2.927589@0] chip0 page=8225
[ 2.928086@0] uncorrect ecc here at page:8259, chip:0
[ 2.928106@0] blk check good but read failed
[ 2.928107@0] chip0 page=8259
[ 2.928605@0] uncorrect ecc here at page:8293, chip:0
[ 2.928626@0] blk check good but read failed
[ 2.928627@0] chip0 page=8293
[ 2.929124@0] uncorrect ecc here at page:8327, chip:0
[ 2.929143@0] blk check good but read failed
[ 2.929144@0] chip0 page=8327
[ 2.929641@0] uncorrect ecc here at page:8361, chip:0
[ 2.929661@0] blk check good but read failed
[ 2.929663@0] chip0 page=8361
[ 2.930159@0] uncorrect ecc here at page:8395, chip:0
[ 2.930180@0] blk check good but read failed
[ 2.930181@0] chip0 page=8395
[ 2.930677@0] uncorrect ecc here at page:8429, chip:0
[ 2.930698@0] blk check good but read failed
[ 2.930699@0] chip0 page=8429
[ 2.946484@0] NAND CKECK:arg ndtb:arg_valid=1,blk_addr=13,page_addr=18
[ 2.955055@0] total_blk:60
[ 2.955060@0] nand block at blk 4 is bad
[ 2.955061@0] nand block at blk 5 is bad
[ 2.955063@0] nand block at blk 6 is bad
[ 2.955064@0] nand block at blk 7 is bad
[ 2.960202@0] nand block at blk 18 is bad
[ 2.960203@0] nand block at blk 19 is bad
[ 2.966524@0] nand block at blk 32 is bad
[ 2.966526@0] nand block at blk 33 is bad
[ 2.982785@0] NAND CKECK:arg nenv:arg_valid=1,blk_addr=14,page_addr=18
[ 2.985069@0] nand blk 4 is shipped bad block
[ 2.985071@0] nand blk 5 is shipped bad block
[ 2.985072@0] nand blk 6 is shipped bad block
[ 2.985073@0] nand blk 7 is shipped bad block
[ 2.985078@0] nand blk 18 is shipped bad block
[ 2.985079@0] nand blk 19 is shipped bad block
[ 2.985084@0] nand blk 32 is shipped bad block
[ 2.985085@0] nand blk 33 is shipped bad block
[ 2.985109@0] adjust phy offset:4
[ 2.985119@0] adjust phy offset:4
[ 2.985141@0] nfboot.
[ 2.985143@0] off:0x000000000000-0x000001000000 :partn=0:single_chip single_plane
[ 2.985145@0] nfcache.
[ 2.985147@0] off:0x00000f000000-0x00002b000000 :partn=1:single_chip multi_plane
[ 2.985148@0] nfcode.
[ 2.985150@0] off:0x00003a000000-0x00008f000000 :partn=9:single_chip multi_plane
[ 2.985151@0] nfdata.
[ 2.985153@0] off:0x0000c9000000-0x000137000000 :partn=1:single_chip multi_plane
[ 2.985158@0] amlnand_add_nftl:
[ 2.985342@0] Creating 1 ntd partitions
[ 2.985346@0] block_num 86
[ 2.985346@0]
[ 2.985408@0] ------init_ntd
[ 2.985725@1] ntd: Giving out device 0 to nfcache
[ 2.985727@1] Creating 9 ntd partitions
[ 2.985729@1] block_num 286
[ 2.985729@1]
[ 2.986103@1] ntd: Giving out device 1 to nfcode
[ 2.986105@1] Creating 1 ntd partitions
[ 2.986107@1] block_num 622
[ 2.986107@1]
[ 2.986706@1] ntd: Giving out device 2 to nfdata
[ 2.986709@1] amlnf_init() 694
[ 2.987044@1] amlnf_init() 700
[ 2.987442@1] saradc c1108680.saradc: initialized by BL30
[ 2.987445@1] saradc c1108680.saradc: calibration start:
[ 2.987493@1] saradc c1108680.saradc: nominal=0, value=3
[ 2.987537@1] saradc c1108680.saradc: nominal=256, value=253
[ 2.987582@1] saradc c1108680.saradc: nominal=512, value=508
[ 2.987628@1] saradc c1108680.saradc: nominal=768, value=764
[ 2.987673@1] saradc c1108680.saradc: nominal=1023, value=1019
[ 2.987676@1] saradc c1108680.saradc: calibration end: coef=4104
[ 2.987831@1] remote: Driver init
[ 2.987881@1] remote: platform_data g_remote_ao_offset=580
[ 2.987883@1] remote: platform_data irq =228
[ 2.987914@1] remote: set drvdata completed

[ 2.987925@1] remote: device_create_file completed

[ 2.988204@1] input: aml_keypad as /devices/meson-remote.9/input/input0
[ 2.988460@1] remote: input_register_device completed

[ 2.988525@1] remote: [0x480] = 0x1dd0190
[ 2.988527@1] remote: [0x484] = 0xf800ca
[ 2.988529@1] remote: [0x488] = 0x82006e
[ 2.988532@1] remote: [0x48c] = 0x3c0030
[ 2.988534@1] remote: [0x490] = 0x30fa0013
[ 2.988536@1] remote: [0x498] = 0x6f19000
[ 2.988538@1] remote: [0x49c] = 0xbe40
[ 2.988540@1] remote: [0x580] = 0xfa00a0
[ 2.988542@1] remote: [0x584] = 0xfa00a0
[ 2.988544@1] remote: [0x588] = 0xfa00a0
[ 2.988546@1] remote: [0x58c] = 0x640030
[ 2.988548@1] remote: [0x590] = 0x30fa0013
[ 2.988551@1] remote: [0x598] = 0x961b800
[ 2.988553@1] remote: [0x59c] = 0x9740
[ 2.988555@1] remote: [0x5a0] = 0x104
[ 2.988557@1] remote: [0x5a4] = 0x0
[ 2.988559@1] remote: [0x5a8] = 0x0
[ 2.988562@1] remote: set_remote_mode[72]
[ 2.988592@1] remote: remote config major:232

[ 2.988766@1] remote: physical address:0x226cc000
[ 2.989131@1] gpio-key gpio_keypad.41: gpio_key: 0 name(power) pin()
[ 2.989135@1] gpio-key gpio_keypad.41: amlogic_gpio_name_map_num pin 0.
[ 2.989146@1] gpio-key gpio_keypad.41: gpio_key: 0 power(125)
[ 2.989178@1] gpio-key gpio_keypad.41: start setup_timer
[ 2.989187@1] gpio-key gpio_keypad.41: power key(116) registed.
[ 2.989332@1] input: gpio_keypad as /devices/gpio_keypad.41/input/input1
[ 2.989467@1] gpio-key gpio_keypad.41: gpio keypad register input device completed.
[ 2.989476@1] input input1: gpio keypad major:231
[ 2.990028@1] i2c-core: driver [mir3da] using legacy suspend method
[ 2.990030@1] i2c-core: driver [mir3da] using legacy resume method
[ 2.990099@1] i2c-core: driver [lis3dh_acc] using legacy suspend method
[ 2.990100@1] i2c-core: driver [lis3dh_acc] using legacy resume method
[ 2.990230@1] i2c-core: driver [bma222] using legacy suspend method
[ 2.990231@1] i2c-core: driver [bma222] using legacy resume method
[ 2.990362@1] i2c-core: driver [dmard06] using legacy suspend method
[ 2.990364@1] i2c-core: driver [dmard06] using legacy resume method
[ 2.990430@1] lsm303d driver: init
[ 2.990568@1] i2c-core: driver [dmard10] using legacy suspend method
[ 2.990569@1] i2c-core: driver [dmard10] using legacy resume method
[ 2.990644@1] stk8313_init
[ 2.990713@1] ======stk831x init ok======
[ 2.990715@1] stk831x_init
[ 2.990780@1] mxc622x accelerometer driver: init
[ 2.990846@1] i2c-core: driver [mxc622x] using legacy suspend method
[ 2.990848@1] i2c-core: driver [mxc622x] using legacy resume method
[ 2.990850@1] mxc6255xc accelerometer driver: init
[ 2.990914@1] i2c-core: driver [mxc6255xc] using legacy suspend method
[ 2.990915@1] i2c-core: driver [mxc6255xc] using legacy resume method
[ 2.990982@1] l3gd20_gyr: gyroscope sysfs driver init
[ 2.991242@1] cm3217 v.1.0.0.1
[ 2.991306@1] i2c-core: driver [elan_epl6814] using legacy suspend method
[ 2.991309@1] i2c-core: driver [elan_epl6814] using legacy resume method
[ 2.991374@1] i2c-core: driver [LTR501] using legacy suspend method
[ 2.991376@1] i2c-core: driver [LTR501] using legacy resume method
[ 2.991575@1] aml dvb init
[ 2.992684@1] usbcore: registered new interface driver snd-usb-audio
[ 2.993187@1] dummy_codec_platform_probe
[ 2.993398@1] *****enter pcm2bt_codec_probe
[ 2.993537@1] enter aml_soc_platform_pcm2bt_probe
[ 2.993889@1] divider=16,frac=33920000,SDMval=4523
[ 2.994054@1] enter aml_pcm_dai_probe
[ 2.994213@1] [aml-spdif-dai]enter aml_dai_spdif_init
[ 2.994266@1] aml_spdif_probe
[ 2.994421@1] enter spdif_dit_probe
[ 2.994879@1] enter aml_asoc_init
[ 2.994896@1] p_aml_audio->hp_disable=1
[ 2.994899@1] falied to get spk event delay time
[ 2.994900@1] spk_event delay_time = 0
[ 2.995625@1] aml_snd_card aml_m8_snd.39: dummy <-> I2S.31 mapping ok
[ 2.996048@1] aml_snd_card aml_m8_snd.39: dit-hifi <-> SPDIF.32 mapping ok
[ 2.996112@1] enter aml_pcm2bt_preallocate_dma_buffer stream: 0
[ 2.996141@1] enter aml_pcm2bt_preallocate_dma_buffer stream: 1
[ 2.996173@1] aml_snd_card aml_m8_snd.39: pcm2bt-pcm <-> PCM.33 mapping ok
[ 3.005329@1] audio use jtag pinmux as i2s output, read val =ffffffff
[ 3.009489@1] GACT probability NOT on
[ 3.009500@1] Mirror/redirect action on
[ 3.009504@1] u32 classifier
[ 3.009505@1] Actions configured
[ 3.009510@1] Netfilter messages via NETLINK v0.30.
[ 3.009559@1] nf_conntrack version 0.5.0 (6451 buckets, 25804 max)
[ 3.009928@1] ctnetlink v0.93: registering with nfnetlink.
[ 3.010386@1] xt_time: kernel timezone is -0000
[ 3.010459@1] ipip: IPv4 over IPv4 tunneling driver
[ 4.469416@1] input input1: key 116 up
[ 4.469456@0] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.469583@0] arp_tables: (C) 2002 David S. Miller
[ 4.483283@0] TCP: cubic registered
[ 4.486764@0] Initializing XFRM netlink socket
[ 4.491884@0] NET: Registered protocol family 10
[ 4.496472@0] mip6: Mobile IPv6
[ 4.498801@0] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 4.504524@0] sit: IPv6 over IPv4 tunneling driver
[ 4.510095@0] NET: Registered protocol family 17
[ 4.513749@0] NET: Registered protocol family 15
[ 4.518297@0] Bridge firewalling registered
[ 4.522428@0] Bluetooth: RFCOMM TTY layer initialized
[ 4.527416@0] Bluetooth: RFCOMM socket layer initialized
[ 4.532620@0] Bluetooth: RFCOMM ver 1.11
[ 4.536502@0] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.541909@0] Bluetooth: BNEP filters: protocol multicast
[ 4.547352@0] Bluetooth: BNEP socket layer initialized
[ 4.552346@0] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 4.558407@0] Bluetooth: HIDP socket layer initialized
[ 4.563535@0] l2tp_core: L2TP core driver, V2.0
[ 4.567987@0] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 4.572874@0] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[ 4.578609@0] l2tp_netlink: L2TP netlink interface
[ 4.583359@0] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[ 4.589380@0] l2tp_debugfs: L2TP debugfs support
[ 4.593937@0] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[ 4.600501@0] NET: Registered protocol family 35
[ 4.605120@0] Key type dns_resolver registered
[ 4.609939@0] Registering SWP/SWPB emulation handler
[ 4.614904@1] regulator-dummy: disabling
[ 4.618510@1] aml_vrtc rtc.25: setting system clock to 2015-01-01 00:00:08 UTC (1420070408)
[ 4.627573@1] enter cpufreq
[ 4.629389@1] probe cpufreq okay
[ 4.635256@1] hdmitx: cec: CEC probe, fun_config:0
[ 4.637640@1] input: cec_input as /devices/virtual/input/input2
[ 4.643509@1] hdmitx: cec: pinmux:ffffffc022585e80, name:hdmitx_aocec
[ 4.649637@1] hdmitx: cec: value:78009801
[ 4.653614@1] hdmitx: cec: value2:0
[ 4.657080@1] hdmitx: cec: irq:231, name:hdmitx_cec, ret:0
[ 4.662518@1] hdmitx: system: not find cec config
[ 4.667152@1] hdmitx: system: not find ao cec
[ 4.671473@1] hdmitx: cec: hdmitx_device->cec_init_ready:0x1
[ 4.677086@1]
6enter meson_pm_probe!
[ 4.680783@1] meson_pm_probe done
[ 4.684176@1] aml_istbt_dev_ready NULL
[ 4.6877P 4.694255@1] ttyS0 use xtal 24000000 change 115200 to 115200
[ 4.694760@1] Freeing unused kernel memory: 1028K (ffffffc001d02000 - ffffffc001e03000)
[ 4.787126@0] switch_vpu_mem_pd: viu_vd1 OFF
[ 4.787153@0] switch_vpu_mem_pd: afbc_dec OFF
[ 4.790078@0] switch_vpu_mem_pd: di_post OFF
[ 4.794304@0] switch_vpu_mem_pd: viu_vd2 OFF
[ 4.868197@2] audit: type=1403 audit(1420070408.740:2): policy loaded auid=4294967295 ses=4294967295
[ 4.910644@2] init: could not import file 'init.amlogic.wifi.rc' from '/init.amlogic.rc'
[ 4.914249@2] init: command 'loglevel 7' action=early-init status=0 (init.amlogic.board.rc:4)
[ 4.926451@2] aml_nftl_dev: module license 'Proprietary' taints kernel.
[ 4.928091@2] Disabling lock debugging due to kernel taint
[ 4.935125@2] sync 1
[ 4.935684@2] boot_device_flag. 1
[ 4.939042@2] register_ntd_blktrans start
[ 4.943012@2] ntd device 250!
[ 4.946028@2] ntd->name: nfcache
[ 4.949142@2] adjust_block_num. 4,reserved_block_ratio 10
[ 4.954607@2] nftl version 150922y
[ 4.957947@2] nftl part attr 0
[ 4.961045@2] size_in_blk 86; total_block 76;
[ 4.965310@2] nftl start:76,12
[ 4.968445@2] first
[ 5.008546@2] average_erase_count:0
[ 5.008575@2] second 51,64
[ 5.009083@2] part->max_discard_block = 4
[ 5.067466@2] current_block1:33
[ 5.083932@2] liang:create_part_list:871, current block used page: 15
[ 5.084730@2] all discard block full!!
[ 5.088448@2] free list:
[ 5.090934@2] free block cnt = 66
[ 5.094252@2] new current block is 35
[ 5.381694@0] prio_garbage_collect_no_last_page_in_create_list put_phy_block_to_free_list!
[ 5.965889@0] recover_current_block_mapping. fill the current block, from page 255
[ 5.967895@0] total discard page count is 0
[ 5.972022@0] create_part_list:1141,current_used_discard_block=34,current_discard_block_used_count=146
[ 5.981460@0] unmappig_pages=15846,discarded_pages=0,mapping_pages=538
[ 5.987762@0] nftl ok!
[ 5.992553@2] aml_nftl_add_ntd ok
[ 5.993379@2] ntd device 250!
[ 5.996258@2] ntd->name: nfcode
[ 5.999367@2] adjust_block_num. 4,reserved_block_ratio 10
[ 6.004816@2] nftl version 150922y
[ 6.008191@2] nftl part attr 0
[ 6.011379@2] size_in_blk 286; total_block 275;
[ 6.015673@2] nftl start:275,29
[ 6.019093@2] first
[ 6.156035@2] average_erase_count:1
[ 6.156054@2] second 242,246
[ 6.156733@2] part->max_discard_block = 4
[ 6.203650@1] CPU3: shutdown
[ 6.413464@2] current_block1:217
[ 6.461979@2] liang:create_part_list:871, current block used page: 47
[ 6.462769@2] all discard block full!!
[ 6.466591@2] free list:
[ 6.468976@2] free block cnt = 114
[ 6.472340@2] new current block is 218
[ 6.765444@0] prio_garbage_collect_no_last_page_in_create_list put_phy_block_to_free_list!
[ 7.334136@0] recover_current_block_mapping. fill the current block, from page 255
[ 7.336134@0] total discard page count is 0
[ 7.340274@0] create_part_list:1141,current_used_discard_block=216,current_discard_block_used_count=444
[ 7.350349@0] unmappig_pages=27650,discarded_pages=0,mapping_pages=35326
[ 7.356249@0] nftl ok!
[ 7.368182@2] aml_nftl_add_ntd ok
[ 7.368208@2] ntd device 250!
[ 7.368805@2] ntd->name: nfdata
[ 7.371915@2] adjust_block_num. 4,reserved_block_ratio 10
[ 7.377360@2] nftl version 150922y
[ 7.380773@2] nftl part attr 0
[ 7.384167@2] size_in_blk 622; total_block 594;
[ 7.388212@2] nftl start:594,58
[ 7.391932@2] first
[ 7.599581@2] found discard block:451
[ 7.681558@2] average_erase_count:16
[ 7.681579@2] second 591,536
[ 7.682341@2] part->max_discard_block = 4
[ 7.883674@0] CPU1: shutdown
[ 8.302676@2] current_block1:146
[ 8.537913@2] liang:create_part_list:871, current block used page: 232
[ 8.539793@2] currnet_discard_block1:451
[ 8.580670@2] reach the last discard page:33
[ 8.581231@2] free list:
[ 8.581799@2] free block cnt = 14
[ 8.585085@2] new current block is 275
[ 9.096568@0] prio_garbage_collect_no_last_page_in_create_list put_phy_block_to_free_list!
[ 9.440585@0] recover_current_block_mapping. fill the current block, from page 255
[ 9.442584@0] total discard page count is 33
[ 9.446832@0] create_part_list:1141,current_used_discard_block=451,current_discard_block_used_count=469
[ 9.457768@0] unmappig_pages=70562,discarded_pages=5146,mapping_pages=61508
[ 9.463026@0] nftl ok!
[ 9.467727@0] aml_nftl_add_ntd ok
[ 9.468640@0] init_aml_nftl end
[ 9.472049@0] init: command 'insmod /boot/aml_nftl_dev.ko' action=early-init status=0 (init.amlogic.board.rc:5)
[ 9.481908@0] init: command 'mount configfs configfs /sys/kernel/config' action=early-init status=0 (init.amlogic.board.rc:7)
[ 9.514799@2] mali-utgard d00c0000.mali: max pp is 3
[ 9.514833@2] mali-utgard d00c0000.mali: set min pp to default 1
[ 9.520079@2] mali-utgard d00c0000.mali: min pp is 1
[ 9.525025@2] mali-utgard d00c0000.mali: set min clk default to 0
[ 9.531033@2] mali-utgard d00c0000.mali: min clk is 0
[ 9.536165@2] mali-utgard d00c0000.mali: hiu io source 0xffffff800016e000
[ 9.542941@2] mali-utgard d00c0000.mali: hiu io source 0xffffff800017e000
[ 9.549760@2] mali-utgard d00c0000.mali: num of pp used most of time 3
[ 9.556225@2] mali-utgard d00c0000.mali: clock dvfs table size is 6
[ 9.562429@2] mali-utgard d00c0000.mali: max clk set 4
[ 9.567524@2] mali-utgard d00c0000.mali: max clk is 4
[ 9.572607@2] mali-utgard d00c0000.mali: turbo clk set to 5
[ 9.578132@2] mali-utgard d00c0000.mali: turbo clk is 5
[ 9.583393@2] mali-utgard d00c0000.mali: default clk set to 2
[ 9.589079@2] mali-utgard d00c0000.mali: default clk is 2
[ 9.594571@2] mali-utgard d00c0000.mali: ====================0====================
[ 9.594571@2] clk_freq= 125000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<30 120>, clk_sample=125
[ 9.612634@2] mali-utgard d00c0000.mali: ====================1====================
[ 9.612634@2] clk_freq= 285000000, clk_parent=fclk_div7, voltage=1150, keep_count=5, threshod=<100 190>, clk_sample=285
[ 9.630833@2] mali-utgard d00c0000.mali: ====================2====================
[ 9.630833@2] clk_freq= 400000000, clk_parent=fclk_div5, voltage=1150, keep_count=5, threshod=<152 207>, clk_sample=400
[ 9.649034@2] mali-utgard d00c0000.mali: ====================3====================
[ 9.649034@2] clk_freq= 500000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<180 220>, clk_sample=500
[ 9.667230@2] mali-utgard d00c0000.mali: ====================4====================
[ 9.667230@2] clk_freq= 666000000, clk_parent=fclk_div3, voltage=1150, keep_count=5, threshod=<210 236>, clk_sample=666
[ 9.685429@2] mali-utgard d00c0000.mali: ====================5====================
[ 9.685429@2] clk_freq= 792000000, clk_parent= gp0_pll, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=792
[ 9.706165@0] gpu cooling register okay with err=0
[ 9.708604@2] gpu core cooling register okay with err=0
[ 9.713955@2] Mali: Mali device driver loaded
[ 9.719356@2] init: command 'insmod /boot/mali.ko mali_debug_level=2 mali_shared_mem_size=0x40000000' action=early-init status=0 (init.amlogic.board.rc:10)
[ 9.731688@2] init: processing action 0x4d82e8 (wait_for_coldboot_done)
[ 9.738217@2] init: wait for /dev/.coldboot_done
[ 9.742829@2] init: command 'wait_for_coldboot_done' action=wait_for_coldboot_done status=0 ((null):0)
[ 9.752020@2] init: processing action 0x4d8338 (mix_hwrng_into_linux_rng)
[ 9.758871@2] init: Mixed 512 bytes from /dev/hw_random into /dev/urandominit: command 'mix_hwrng_into_linux_rng' action=mix_hwrng_into_linux_rng status=0 ((null):0)
[ 9.773409@2] init: processing action 0x4d8388 (keychord_init)
[ 9.779187@2] init: command 'keychord_init' action=keychord_init status=0 ((null):0)
[ VКrєК’ВКўЙ] ttyS0 use xtal 24000000 change 115200 to 115200
[ 9.803523@2] init: command 'console_init' action=console_init status=0 ((null):0)
[ 9.805438@2] init: processing action 0x4bd068 (init)
[ 9.810445@2] init: command 'sysclktz 0' action=init status=0 (/init.rc:33)
[ 9.822930@2] init: property 'ro.serialno' doesn't exist while expanding '$'
[ 9.825482@2] init: cannot expand '$' while writing to '/sys/class/android_usb/android0/iSerial'
[ 9.835316@2] init: property 'ro.serialno' doesn't exist while expanding '$'
[ 9.843403@2] init: cannot expand '$' while writing to '/sys/class/android_usb/android0/iSerial'
[ 9.854145@0] aml_nftl_open ok!
[ 9.865340@2] EXT4-fs (system): mounted filesystem with ordered data mode. Opts: (null)
[ 9.867806@2] fs_mgr: __mount(source=/dev/block/system,target=/system,type=ext4)=0
[ 9.875249@2] blktrans_ioctl -cmd: 125d,80200204,64
[ 9.875249@2]
[ 9.881851@2] aml_nftl_open ok!
[ 9.886071@2] random: nonblocking pool is initialized
[ 9.889897@2] EXT4-fs (data): Ignoring removed nomblk_io_submit option
[ 10.308541@2] EXT4-fs (data): recovery complete
[ 10.311009@2] EXT4-fs (data): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[ 10.317735@2] fs_mgr: check_fs(): mount(/dev/block/data,/data,ext4)=0
[ 10.361867@0] fs_mgr: Running /system/bin/e2fsck on /dev/block/data
[ 10.431874@0] aml_nftl_open ok!
[ 10.431939@0] aml_nftl_open ok!
[ 10.448324@2] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 10.448403@2] e2fsck: /dev/block/data: clean, 18038/274720 files, 394263/1097728 blocks
[ 10.455597@2] aml_nftl_open ok!
[ 10.459604@2] EXT4-fs (data): Ignoring removed nomblk_io_submit option
[ 10.467975@2] EXT4-fs (data): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic,discard
[ 10.476429@2] fs_mgr: __mount(source=/dev/block/data,target=/data,type=ext4)=0
[ 10.483586@2] aml_nftl_open ok!
[ 10.487686@2] EXT4-fs (cache): Ignoring removed nomblk_io_submit option
[ 10.529704@2] EXT4-fs (cache): recovery complete
[ 10.534149@2] EXT4-fs (cache): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[ 10.539064@2] fs_mgr: check_fs(): mount(/dev/block/cache,/cache,ext4)=0
[ 10.586377@2] fs_mgr: Running /system/bin/e2fsck on /dev/block/cache
[ 10.591977@2] aml_nftl_open ok!
[ 10.592040@2] aml_nftl_open ok!
[ 10.613878@2] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 10.613936@2] e2fsck: /dev/block/cache: clean, 22/32768 files, 4240/131072 blocks
[ 10.620586@2] aml_nftl_open ok!
[ 10.624748@2] EXT4-fs (cache): Ignoring removed nomblk_io_submit option
[ 10.635930@2] EXT4-fs (cache): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
[ 10.641211@2] fs_mgr: __mount(source=/dev/block/cache,target=/cache,type=ext4)=0
[ 10.749815@0] binder: 2735:2735 transaction failed 29189, size 0-0
[ 10.752538@2] init: cannot find '/system/bin/instabootserver', disabling 'instaboot'
[ 10.795515@2] thermal_firmware_init
[ 10.795712@2] thermal_firmware_init: chip trimming true
[ 10.798556@2] amlogic_thermal_probe, this chip is trimmed, use thermal
[ 10.805093@2] amlogic-thermal amlogic_thermals.40: amlogic thermal probe start
[ 10.812193@2] #thermal-cells=7
[ 10.815299@2] keep_mode enabled
[ 10.818306@2] keep_mode_max_range: [2016000, 666, 4, 3]
[ 10.823702@2] pdata->temp_trip_count=2
[ 10.827372@2] temperature=75 on trip point=0
[ 10.831594@2] fixing high_freq=2016001 to 2016000 at trip point 0,level=0
[ 10.838316@2] fixing low_freq=2016001 to 2016000 at trip point 0,level=0
[ 10.844988@2] gpu[0].gpu_high_freq=667,tmp_level[0].gpu_high_freq=667
[ 10.851348@2] cpu[0] core num==4
[ 10.854556@2] gpu[0] core num==3
[ 10.857725@2] temperature=260 on trip point=1
[ 10.862042@2] fixing high_freq=-1 to -22 at trip point 1,level=-1
[ 10.868076@2] fixing low_freq=-1 to -22 at trip point 1,level=-1
[ 10.874054@2] gpu[1].gpu_high_freq=-1,tmp_level[1].gpu_high_freq=-1
[ 10.880245@2] cpu[1] core num==-1
[ 10.883548@2] gpu[1] core num==-1
[ 10.886796@2] idle interval=1000
[ 10.889986@2] pdata->name:aml_thermal, pdata:ffffffc02286b200
[ 10.895729@2] amlogic_thermal_init_from_dts, 1023
[ 10.900338@2] amlogic_thermal_initialize, 1039, pdata:ffffffc02286b200
[ 10.908236@0] logd.auditd: start
[ 10.908336@2] tmp_trip[0].cpu_core_upper=0
[ 10.908350@2] tmp_trip[1].cpu_core_upper=-1
[ 10.908359@2] aml_thermal bind thermal-cpucore-0 okay !
[ 10.908379@2] aml_thermal bind thermal-cpufreq-0 okay !
[ 10.908382@2] tmp_trip[0].gpu_core_upper=0
[ 10.908391@2] tmp_trip[1].gpu_core_upper=-1
[ 10.908399@2] aml_thermal bind thermal-gpucore-0 okay !
[ 10.908404@2] pdata->tmp_trip[0].gpu_lower_level=0
[ 10.908406@2] pdata->tmp_trip[0].gpu_upper_level=0
[ 10.908415@2] pdata->tmp_trip[1].gpu_lower_level=-1
[ 10.908417@2] pdata->tmp_trip[1].gpu_upper_level=-1
[ 10.908425@2] aml_thermal bind thermal-gpufreq-0 okay !
[ 10.908429@2] gpufreq_low:4, freq:166
[ 10.908432@2] init state: [0 0 0 0]
[ 10.908434@2] cal steps: [5 4 4 3]
[ 10.908435@2] default_steps:[1 1 1 1]
[ 10.983399@2] amlogic: Kernel Thermal management registered
[ 10.986251@2] amlogic-thermal amlogic_thermals.40: amlogic thermal probe done
[ 10.995308@2] codec:video first pts = 0
[ 10.997140@2] codec:hevc_clock_set-----2
[ 11.000989@2] codec:hevc_set_clk 0, 1
[ 11.004815@2] codec:vdec_clock_set-----2
[ 11.008506@2] codec:vdec1_set_clk 0, 1
[ 11.012199@2] codec:vdec_clock_set 2 to 500
[ 11.016769@2] codec:hevc_clock_set-----2
[ 11.020228@2] codec:hevc_set_clk 0, 1
[ 11.023910@2] codec:vdec_clock_set-----2
[ 11.027728@2] codec:vdec1_set_clk 0, 1
[ 11.031434@2] codec:vdec_clock_set 2 to 500
[ 11.035740@2] codec:vdec_clock_set-----2
[ 11.039454@2] codec:vdec1_set_clk 0, 1
[ 11.043166@2] codec:vdec_clock_set 2 to 500
[ 11.047491@2] codec:vdec_clock_set-----2
[ 11.051193@2] codec:vdec1_set_clk 0, 1
[ 11.054974@2] codec:vdec_clock_set 2 to 500
[ 11.062808@2] amlkey_init() enter!
[ 11.062846@2] amlkey_init() storagekey_info.buffer=ffffff8001900000, storagekey_info.size = 40000!
[ 11.083253@2] vfm_map_store:rm default
[ 11.083315@2] vfm_map_store:add default decoder ppmgr deinterlace amvideo
[ 11.088526@2] init: property 'ro.usb.vendor.string' doesn't exist while expanding '$'
[ 11.097866@2] init: cannot expand '$' while writing to '/sys/class/android_usb/android0/f_mass_storage/vendor_string'
[ 11.110273@2] init: property 'ro.usb.product.string' doesn't exist while expanding '$'
[ 11.120219@2] init: cannot expand '$' while writing to '/sys/class/android_usb/android0/f_mass_storage/product_string'
[ 11.130409@0] dig: dig start!
[ 11.174141@2] init: property 'ro.usb.vendor.string' doesn't exist while expanding '$'
[ 11.178238@2] init: cannot expand '$' while writing to '/sys/class/android_usb/android0/f_mass_storage/vendor_string'
[ 11.190859@2] init: property 'ro.usb.product.string' doesn't exist while expanding '$'
[ 11.200521@2] init: cannot expand '$' while writing to '/sys/class/ant 11.214325@1] ttyS0 use xtal 24000000 change 115200 to 115200
[ 11.215456@2] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
[ 11.221956@2] init: cannot find '/system/bin/rild', disabling 'ril-daemon'
[ 11.333264@0] init: Warning! Service low_mem needs a SELinux domain defined; please fix!
[ 11.338167@2] type=1400 audit(1420070415.210:3): avc: denied < entrypoint > for pid=2795 comm="init" path="/system/etc/install-recovery.sh" dev="system" ino=57346 scontext=u:r:install_recovery:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=1
shell@p201:/ $ [ 11.382678@0] init: Warning! Service daemonsu needs a SELinux domain defined; please fix!
[ 11.408265@0] zcomp_create, comress:lz4
[ 11.408345@0] zram0: detected capacity change from 0 to 524288000
[ 11.413009@1] init: Warning! Service zygote needs a SELinux domain defined; please fix!
[ 11.427058@1] android_usb: Cannot enable 'adb' (-22)
[ 11.427656@1] android_usb: Cannot enable 'adb' (-22)[ 11.431511@2] Adding 511996k swap on /dev/block/zram0. Priority:-1 extents:1 across:511996k SS
[ 11.450699@1] warning: `su' uses 32-bit capabilities (legacy support in use)
[ 11.450759@0] warning: `daemonsu' uses 32-bit capabilities (legacy support in use)
[ 11.452344@2] type=1400 audit(1420070415.320:4): avc: denied < setcurrent > for pid=2821 comm="daemonsu" scontext=u:r:install_recovery:s0 tcontext=u:r:install_recovery:s0 tclass=process permissive=1
[ 11.452653@2] type=1400 audit(1420070415.320:5): avc: denied < dyntransition > for pid=2821 comm="daemonsu" scontext=u:r:install_recovery:s0 tcontext=u:r:init:s0 tclass=process permissive=1
[ 11.452784@0] init: untracked pid 2819 exited with status 0
[ 11.514930@0] remote: cur_mode = 0
[ 11.514965@0] remote: [0x580] = 0x1f40190
[ 11.516671@0] remote: [0x584] = 0x12c00c8
[ 11.520645@0] remote: [0x588] = 0x960050
[ 11.523314@2] uboot env amlnf_env_read. ####
[ 11.529392@2] remote: [0x58c] = 0x480028
[ 11.532713@2] remote: [0x590] = 0x70fa0013
[ 11.537256@2] remote: [0x598] = 0x8616800
[ 11.542463@2] remote: [0x59c] = 0x9f00
[ 11.544556@2] remote: [0x5a0] = 0x0
[ 11.548075@2] remote: [0x5a4] = 0x0
[ 11.551894@2] remote: [0x5a8] = 0x0
[ 11.555079@2] remote: set_remote_mode[72]
[ 11.556962@0] remote: do nothing
[ 11.556973@2] fb: osd[0] enable: 0 (systemcontrol)
[ 11.571871@0] vout_serve: vmode set to 576cvbs
[ 11.575963@0] vout_serve: don't set the same mode as current.
[ 11.582115@0] buf=0
[ 11.583902@0] IEC958_mode_raw=0
[ 11.733596@0] fb: osd[0] enable: 1 (systemcontrol)
[ 11.751840@0] healthd: No charger supplies found
[ 11.751883@0] healthd: No battery devices found
[ 11.767497@0] vout_serve: osd0=> x:0,y:0,w:1920,h:1080
[ 11.767497@0] osd1=> x:0,y:0,w:18,h:18
[ 11.771007@0] fb: current vmode=576cvbs
[ 11.787371@2] fb: osd[1] set scale, h_scale: ENABLE, v_scale: ENABLE
[ 11.788090@2] fb: osd[1].scaledata: 1920 720 1080 288
[ 11.793095@2] fb: osd[1].pandata: 0 0 0 0
[ 11.830026@2] type=1400 audit(1420070415.700:6): avc: denied < search > for pid=2823 comm="su" name="eu.chainfire.supersu" dev="data" ino=106559 scontext=u:r:init:s0 tcontext=u:object_r:app_data_file:s0 tclass=dir permissive=1
[ 11.859758@0] blktrans_ioctl -cmd: 125d,80200204,64
[ 11.859758@0]
[ 11.868887@1] type=1400 audit(1420070415.700:7): avc: denied < search > for pid=2860 comm="su" name="eu.chainfire.supersu" dev="data" ino=106559 scontext=u:r:init:s0 tcontext=u:object_r:app_data_file:s0 tclass=dir permissive=1
[ 11.883876@1] type=1400 audit(1420070415.720:8): avc: denied < getattr > for pid=2823 comm="su" path="/data/data/eu.chainfire.supersu/files/supersu.cfg" dev="data" ino=122516 scontext=u:r:init:s0 tcontext=u:object_r:app_data_file:s0 tclass=file permissive=1
[ 11.909708@1] type=1400 audit(1420070415.720:9): avc: denied < read > for pid=2823 comm="su" name="supersu.cfg" dev="data" ino=122516 scontext=u:r:init:s0 tcontext=u:object_r:app_data_file:s0 tclass=file permissive=1
[ 11.928508@1] type=1400 audit(1420070415.720:10): avc: denied < open > for pid=2823 comm="su" path="/data/data/eu.chainfire.supersu/files/supersu.cfg" dev="data" ino=122516 scontext=u:r:init:s0 tcontext=u:object_r:app_data_file:s0 tclass=file permissive=1
[ 12.038237@1] type=1403 audit(1420070415.910:11): policy loaded auid=4294967295 ses=4294967295
[ 12.040079@0] init: untracked pid 2821 exited with status 1
[ 12.100747@1] EXT4-fs (system): re-mounted. Opts: (null)
[ 12.101163@2] EXT4-fs (system): re-mounted. Opts: (null)
[ 12.117151@3] blktrans_ioctl -cmd: 125d,80200204,64
[ 12.117151@3]
[ 12.265991@3] EXT4-fs (system): re-mounted. Opts: (null)
[ 12.458072@0] EXT4-fs (system): re-mounted. Opts: (null)
[ 12.458688@2] EXT4-fs (system): re-mounted. Opts: (null)
[ 12.487280@3] EXT4-fs (system): re-mounted. Opts: (null)
[ 12.490852@2] EXT4-fs (system): re-mounted. Opts: (null)
[ 12.569259@0] init: untracked pid 2874 exited with status 1
[ 12.703813@0] init: untracked pid 2982 exited with status 0
[ 12.943761@2] type=1403 audit(1420070416.820:12): policy loaded auid=4294967295 ses=4294967295
[ 13.375745@2] type=1403 audit(1420070417.250:13): policy loaded auid=4294967295 ses=4294967295
[ 13.380417@0] init: untracked pid 3070 exited with status 1
[ 13.387203@0] EXT4-fs (system): re-mounted. Opts: (null)
[ 13.398320@3] blktrans_ioctl -cmd: 125d,80200204,64
[ 13.398320@3]
[ 13.399828@3] EXT4-fs (system): re-mounted. Opts: (null)
[ 13.477536@0] EXT4-fs (zram0): mounted filesystem with ordered data mode. Opts: (null)
[ 13.710804@2] EXT4-fs (system): re-mounted. Opts: (null)
[ 14.033942@0] init: untracked pid 3105 exited with status 1
#